Barbed Fittings - Mega Sale! Save up to 23%


Mega Sale! Up to 23% off on Barbed Fittings at Mass Fiscal Exposed. Top brands include Apollo Valves, DuraVent, Waterway, Erico, Aqua Science, Yellow Jacket, Eldon James, Maslin, Watts Regulator, GRAINGER APPROVED, Sioux Chief, Zurn Pex, Everhot, MettleAir, Hobart, & Unknown. Hurry! Limited time offers. Offers valid only while supplies last.



Apollo PEX 6907932CP 32 Port PEX Manifold (3/4-inch Inlets, 1/2-inch Outlets) with Shutoff Valves
By Apollo Valves
In Stock
$400.00
$351.55
You Save: 12%

mpn: 6907932CP, ean: 0670750582653,

4.7 out of 5 stars with 40 reviews
32 port PEX manifold (3/4'' inlets, 1/2'' outlets) with shutoff valves.32 Port PEX-B Manifold. Allows individual hot and cold lines to be connected directly to each fixture. Creates a single point shutoff for all home fixtures. Each manifold has an equal number of hot and cold outlets - Outlets are 1/2'' PEX barb shut-off valves. Inlet sizes are 1'' MPT - Each manifold comes with a reducing adapter to 3/4'' PEX barb.


9064KIT 15 DEGREE ELBOW KIT
By DuraVent
In Stock
$255.39
$255.08

mpn: 6DP-E15, ean: 0662492645703,

4.4 out of 5 stars with 27 reviews
DuraPlus Collection 6'' Class A Chimney Pipe Galvanized 15 Degree Elbow Kit The DuraPlus 6'' Class A Chimney Pipe Galvanized 15 Degree Elbow Kit which includes (2) elbows and one Elbow Strap. is used for offsets around obstructions such as rafters, ridgepoles, or joists. May have two pairs of elbows, if needed. Offsets greater than 30° are not permitted in accordance to UL 103 standards. Elbows swivel 360° at base (angles are not adjustable). A pair of elbows is required to return an offset


Waterway 9 in. Deep Seat Gunite 3-Jet Manifold 210-3410G
By Waterway
In Stock
$145.59

mpn: 210-3410G, ean: 0011687789225,

4.2 out of 5 stars with 16 reviews
3-Jet Manifold 9 in. Deep Seat Gunite made by Waterway 210-3410GFeatures: Pre-Plumbed Air and Wate210-3410G.


Erico TAC2G2G Cable To Cable Horizontal Tee Mold Connector 2/0 AWG Concentric Cadweld
By Erico
In Stock
$104.99

mpn: TAC2G2G, ean: 0782856553038,

4.2 out of 5 stars with 28 reviews
Erico TAC2G2G Cable To Cable Horizontal Tee Mold Connector 2/0 AWG Concentric Cadweld®Forms a permanent, low resistance connection. Cable to Cable, Horizontal Tee. Cable Tap Size: 2/0 AWG. Welding Material: 90 or 90PLUSF20, Sold Separately. Welding Powder Side 90.


Stainless Steel Installation Tee Package Wellmate Wm-6, Wm-9, Wm-12 and Flexcon H2pl22, H2pl35, Fl7, Fl12 Well Tanks
By Aqua Science
In Stock
$172.00

ean: 0777808463275,

4.7 out of 5 stars with 8 reviews
Tee Package to install your WELLMATE WM-6, WM-9, WM-12 and Flexcon H2PL22, H2PL35, FL7, FL12 Pressure Tank Includes All Stainless Steel Components: Stainless Steel Tee - Tank Connection: 1'' FPT (via 1'' Union) - In-Line Connections: 1'' MPT x 3/4'' FPT - Drain / Relief Ports: (2) 1/2'' FPT - Accessory Ports: (2) 1/4'' FPT - Length: 4 1/2'' Other Components - Union (1'' FPT) - Check Valve (1'' FPT) - Shutoff Valve (1'' FPT) - 1'' NPTM x 1'' Barb - Boiler Drain (1/2'' MPT) -


Yellow Jacket 41099 Manifold Parts Kit For Titan & Brute II,
By Yellow Jacket
In Stock
$180.68
$167.96
You Save: 7%

mpn: 41099, ean: 0686800410999,

4.0 out of 5 stars with 25 reviews
This is a Yellow Jacket manifold parts kit. Its contents are for the series 41, titan, and brute II manifolds.Made in the USA. Yellow Jacket 41099 complete manifold repair kit. Made by ritchie engineering.


Eldon James L0-6NN Natural Nylon Equal 90 Degree Elbow, 3/8" Hose Barb (Pack of 10) (Fоur Paсk)
By Eldon James
In Stock
$89.99

ean: 7426993798534,

4.6 out of 5 stars with 38 reviews
Temperature Range -50 °F to 275 °F (135 °C). Pressure 125 psi at 70 °F 6/6 Nylons exhibit good tensile strength, moderate stiffness and high impact resistance. They're resistant to fuels, lubricants and many chemicals, but vulnerable to attack by phenols, strong acids and oxidizing agents. MN White Medical Nylon is made from the same resin as Natural Nylon, but has an FDA compliant white colorant added.RoHS Compliant. USP Class VI. Natural Material.


Eldon James T0-6NN Natural Nylon Equal Barb Tee, 3/8" Hose Barb (Pack of 10) (Fоur Paсk)
By Eldon James
In Stock
$89.99

ean: 7426993784308,

4.3 out of 5 stars with 17 reviews
6/6 Nylons exhibit good tensile strength, moderate stiffness and high impact resistance. They're resistant to fuels, lubricants and many chemicals, but vulnerable to attack by phenols, strong acids and oxidizing agents. MN White Medical Nylon is made from the same resin as Natural Nylon, but has an FDA compliant white colorant added.RoHS Compliant. Temperature Range -50 °F to 275 °F (135 °C). Pressure 125 psi at 70 °F.


Maslin SS304 Tee, 1/4 Femal Stainless Steel tee, Stainless fittigs, Stainless Steel Hexagon tee, Hexagon Tee
By Maslin
In Stock
$1,021.00
$785.29
You Save: 23%

mpn: MLS-D41D8CD98F00B204E9800998ECF8427E, ean: 0736865882061,

4.2 out of 5 stars with 37 reviews
1/4'' thread, NPT, PT, BSP optionwindow.adminAccountId=200473293.Item specifics:Type: PlugTechnics: CastingMaterial: Stainless SteelHead code: HexagonConnection: MaleShape: EqualModel number: T-002 (1/4)Is customized: YesType: Plug. Technics: Casting. Material: Stainless Steel. Head code: Hexagon. Connection: Male.


WATTS REGULATOR CO LFN45BM1-U-S Fpt Stainless Steel Strainer 1"
By Watts Regulator
In Stock
$81.80

mpn: 1LFN45BM1-U-S, ean: 0098268332605,

4.2 out of 5 stars with 25 reviews
Lead-free series N45 standard capacity water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure for protection of Plumbing system components and to reduce water consumption. It consists of a bronze body construction, stainless steel integral strainer, thermoplastic seat and cage, thermal expansion bypass, and sealed spring cage for waterworks pit installations. Valves are available in female threaded union or solder union inlet x NPT


Eldon James L0-6NN Natural Nylon Equal 90 Degree Elbow, 3/8" Hose Barb (Pack of 10) (Тhrее Pаck)
By Eldon James
In Stock
$69.99

ean: 7426993798589,

4.1 out of 5 stars with 11 reviews
Temperature Range -50 °F to 275 °F (135 °C). Pressure 125 psi at 70 °F 6/6 Nylons exhibit good tensile strength, moderate stiffness and high impact resistance. They're resistant to fuels, lubricants and many chemicals, but vulnerable to attack by phenols, strong acids and oxidizing agents. MN White Medical Nylon is made from the same resin as Natural Nylon, but has an FDA compliant white colorant added.RoHS Compliant. USP Class VI. Natural Material.


T316L Stainless Steel Female Adapter, Clamp x FNPT Connection Type, 2" Tube Size
By GRAINGER APPROVED
In Stock
$235.70

mpn: NA, ean: 7442552839852,

4.3 out of 5 stars with 41 reviews
T316L Stainless Steel Female Adapter, Clamp x FNPT Connection Type, 2'' Tube SizeFeatues - Features -Item - :Female Adapter. Tube Fitting Material - :T316L Stainless Steel. Fitting Connection Type - :Clamp x FNPT. Tube Size - :2''. Surface Finish - :180 Grit I.D./150 Grit O.D..


4" Inflatable Test Tee Plug
By Sioux Chief
In Stock
$81.24

mpn: NA, ean: 7436805828823,

4.3 out of 5 stars with 19 reviews
This inflatable threaded plug is intended for installation inside the FIP cleanout/test tee in 4'' PVC (Sch. 40/80), ABS or cast iron no-hub DWV systems. Inherent design allows to seal off both the branch and run portions of the test tee while threads provide added safety against blowout during testing.Warning: as with all pressure testing equipment, follow all applicable codes/procedures, manufacturer reccommendations and wear safety gear when performing DWV drain tests. Stay clear of the test


Sioux Chief 672XV0490, 1/2" PEX Manifold w/ valves, 3/4" PEX in, clsd
By Sioux Chief
In Stock
$60.55

mpn: 672XV0490, ean: 0739236405357,

4.4 out of 5 stars with 36 reviews
3/4'' crimp style PEX inlet. Spin closed outlet.(4) branches with 1/2'' PEX ball valves, at 2'' OC.1'' Copper pipe size manifold trunk. Specs: Product Specs Number of Outlets: 4.0 Number of Outlets (Cold): 4.0 Number of Outlets (Hot): 4.0 Size: 1/2'' Material: Copper PEX Size: 1/2'', 3/4'' Application: Plumbing Inlet Size: 3/4'' Outlet Size: 1/2'' Outlet Type: PEX Inlet Type: PEX Fitting System Compatibility: Crimp/Clamp (HydroPEX) Tubing Compatibility: PEX.


Zurn Pex Qppm10 Quickport Manifold Prea
By Zurn Pex
In Stock
$70.03
$57.97
You Save: 17%

mpn: QPPM10, ean: 0084169681997,

4.0 out of 5 stars with 59 reviews
This product is designed to reduce installation time and save energy. It comes ready for installation, and is manufactured using an engineered polymer. It works effectively and is definitely a great quality product.Designed to reduce installation time and save energy. Comes ready for installation. Manufactured using an engineered polymer.


1/2" x 1/2" x 1/2" Tee, Poly Alloy, Lead-Free - Pack of 50
By Everhot
In Stock
$59.06

mpn: NA, ean: 7436805523575,

4.5 out of 5 stars with 39 reviews
This equal size poly PEX tee connects (3) 1/2'' PEX tubing lines.Features: NSF certified (nsf-pw-g) Lead-Free and approved for potable water use in US and Canada; Made to ASTM F2159, F877 and CSA B137.5 standards; UPC listed; Crimp style outlets compatible with crimp or clamp connection methods and all types of PEX (A, B, C); Superior performance in chlorinated, RO and low pH water; Rated up to 200F, 200 psi; For plumbing or heating applications. California proposition 65 warning.


MettleAir 99HB-10 5/8" ID Elbow 90 degree Hose Barb Union Fitting, Brass (Pack of 10)
By MettleAir
In Stock
$55.99

mpn: 99HB-10,

4.7 out of 5 stars with 60 reviews
Please ensure that your tubing/hose inner diameter matches the Hose ID before ordering. Our quality barbed/threaded connectors/couplers are manufactured to the highest standards. They are perfect for connecting lines for air, water, fuel, oil and inert gases.Part #: 99HB-10. Hose ID 1 (Left): 5/8''. Hose ID 2 (Right): 5/8''. Material: Brass. Type: 90 Degree Elbow Hose Barb Union.


Hobart 00-076770 Test Tube, Stainless Steel
By Hobart
In Stock
$60.41
$60.23

mpn: 00-076770, ean: 0046843542642,

4.3 out of 5 stars with 26 reviews
Hobart 00-076770 Test tube. This is a genuine OEM (original equipment manufacturer) part. Hobart manufactures products for the foodservice and food retail industries.Genuine OEM replacement part. Hobart manufactures products for the foodservice and food retail industries. Use genuine OEM parts for safety reliability and performance.


T316L Stainless Steel Eccentric Reducer, Butt Weld Connection Type, 4" x 3" Tube Size
By Unknown
In Stock
$277.10

mpn: NA, ean: 7442552339321,

4.8 out of 5 stars with 22 reviews
T316L Stainless Steel Eccentric Reducer, Butt Weld Connection Type, 4'' x 3'' Tube SizeFeatues - Surface Finish - :180 Grit I.D./150 Grit O.D.Wall Thickness - :0.083'' x 0.065''Features - Surface Finish - :180 Grit I.D./150 Grit O.D.Wall Thickness - :0.083'' x 0.065''Item - :Eccentric Reducer. Tube Fitting Material - :T316L Stainless Steel. Fitting Connection Type - :Butt Weld. Tube Size - :4'' x 3''. Overall Length - :4''.


T316L Stainless Steel Male Adapter, Clamp x MNPT Connection Type, 1" Tube Size
By GRAINGER APPROVED
In Stock
$160.70

mpn: NA, ean: 7442552636680,

4.5 out of 5 stars with 11 reviews
T316L Stainless Steel Male Adapter, Clamp x MNPT Connection Type, 1'' Tube SizeFeatues - Features -Item - :Male Adapter. Tube Fitting Material - :T316L Stainless Steel. Fitting Connection Type - :Clamp x MNPT. Tube Size - :1''. Surface Finish - :180 Grit I.D./150 Grit O.D..



Viewing Page 1 of 8

View more products in Tube Fittings.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - massfiscalexposed.org. All Rights Reserved.