Flared Tube Fittings - Page 6 - Huge Savings! Save up to 11%


Huge Savings! Up to 11% off on Flared Tube Fittings at Mass Fiscal Exposed, Page 6. Top brands include Weatherhead (Eaton), Parker Hannifin, Vis, Aeroquip, & Weatherhead. Hurry! Limited time offers. Offers valid only while supplies last.



Weatherhead (Eaton) 54X4-45° Elbow - 1/4 in Male SAE 45° Flare x 1/4 in Male SAE 45° Flare, Brass, Pack of 15
By Weatherhead (Eaton)
In Stock
$183.60
4.1 out of 5 stars with 45 reviews
Specs:adapter type: 45 Elbowend 2 thread: (SAE) 7/16-20 end 1 style: Male SAE 45 Flarematerial: Brass end 1 thread: (SAE) 7/16-20maximum operating pressure: 2000 psi end 2 style: Male SAE 45 FlareCalifornia proposition 65 warningadapter type: 45 Elbow. end 2 thread: (SAE) 7/16-20. end 1 style: Male SAE 45 Flare. material: Brass. end 1 thread: (SAE) 7/16-20.


Parker Hannifin 48F-6-8-pk50 Male Connector, 45 Degree, Flare Fitting, 1/4" Flare Tube x 1/8" Male Thread, Brass (Pack of 50)
By Parker Hannifin
In Stock
$253.99
$243.24
You Save: 4%

mpn: 48F-6-8-pk50,

4.5 out of 5 stars with 41 reviews
Male Connector, 45 Degree, Flare Fitting, 3/8'' Flare Tube x 1/2'' Male Thread, Brass.


Parker Hannifin 48F-4-2-pk100 Male Connector, 45 Degree, Flare Fitting, 1/4" Flare Tube x 1/8" Male Thread, Brass (Pack of 100)
By Parker Hannifin
In Stock
$522.79

mpn: 46F-6-6-pk100,

4.2 out of 5 stars with 28 reviews
All brass construction Forged nuts for refrigeration applications Long nuts for vibration U.L. listed for flammable liquids Metal-to-metal seal.


Vis Brass SAE 45 Degree Flare Tube Fitting, Flare Tee Union (200, 1/4" x 1/4" x 1/4" Flare)
By Vis
In Stock
$309.99

mpn: 44,

4.8 out of 5 stars with 25 reviews
The flare tee is made of brass and has tubing connectors. This fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It connects to tubing on all three, flared ends. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting has 45-degree flared construction for a stronger connection than soldered, long-term


Vis Brass SAE 45 Degree Flare Tube Fitting, 90 Degree Male Elbow, 1/2" Flare x 1/4" NPT Male (Pack of 200)
By Vis
In Stock
$532.99

mpn: 49,

4.8 out of 5 stars with 18 reviews
This 90-degree elbow compression tube fitting is made of brass, has a flared tube connection and a male NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This 90-degree elbow fitting, or ''ell,'' connects two tubes at a 90-degree angle to change the direction of flow between tubes. It has a flared tube connection on one end for connecting to a flared tube and a male


Vis Brass SAE 45 Degree Flare Tube Fitting, Half-Union, Male Connector, 3/4" Flare x 1/2" NPT Male (Pack of 200)
By Vis
In Stock
$1,092.99

mpn: 48,

4.5 out of 5 stars with 38 reviews
Resists mechanical pullout for a more secure connectionHalf union for connecting and disconnecting two tubes more easily than with a coupling. 45-degree flare head tube connection on one side and a male NPT connection on the other. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperature range of -65 to +250 degrees F. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and


Vis Brass SAE 45 Degress Flare Tube Fitting, Union,1/4" x 1/4" Flare (Pack of 50)
By Vis
In Stock
$54.99

mpn: 42,

4.0 out of 5 stars with 36 reviews
The union tube fitting is made of brass and has flare connectors. This union fitting has a threaded connection that can be screwed or unscrewed to connect or disconnect pipes more easily than couplings and has a 45-degree flare connection on both ends. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The operating temperatures for this fitting range from -65 to 250 degrees F. This fitting is suitable for copper, brass,


Vis Brass SAE 45 Degree Flare Tube Fitting, Male Run Tee, 1/2" Flare x 3/8" NPT Male x 1/2" Flare (Pack of 200)
By Vis
In Stock
$736.99

mpn: 51,

4.7 out of 5 stars with 41 reviews
This tee compression tube fitting is made of brass, has flared tube connections and a male NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting is T-shaped and has three openings to connect and branch three tubes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Tube dimensions for tees are represented as A x B x C. ''A'' and


Vis Brass SAE 45 Degress Flare Tube Fitting, Union, 3/4" x 3/4" Flare (Pack of 5)
By Vis
In Stock
$47.99

mpn: 42,

4.6 out of 5 stars with 10 reviews
The union tube fitting is made of brass and has flare connectors. This union fitting has a threaded connection that can be screwed or unscrewed to connect or disconnect pipes more easily than couplings and has a 45-degree flare connection on both ends. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The operating temperatures for this fitting range from -65 to 250 degrees F. This fitting is suitable for copper, brass,


Vis Brass SAE 45 Degree Flare Tube Fitting, Reducing Flare Tee Union, 3/8" x 1/4" x 3/8" Tube O.D. (Pack of 5)
By Vis
In Stock
$33.99

mpn: 44-2,

4.7 out of 5 stars with 33 reviews
The flare tee is made of brass and has tubing connectors. This fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It connects to tubing on all three, flared ends. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting has 45-degree flared construction for a stronger connection than soldered, long-term


Eaton Aeroquip GG108-NP10-22 Male JIC to Male Straight Thread Connector, Metric, JIC 37° & Metric End Types, Steel, 7/8 JIC(m) x M22(m) End Size, 5/8" Tube OD
By Aeroquip
In Stock
$30.63

mpn: GG108-NP10-22,

4.6 out of 5 stars with 20 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Vis Brass Inverted Flare Tube Fitting, Adapter, 5/16" OD x 1/8" NPT Female, Convert Tube to NPT Female Pipe (Pack of 20)
By Vis
In Stock
$30.99

mpn: 252,

4.9 out of 5 stars with 33 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Tube fittings are used in various applications, including machine tools, airplane and truck


Eaton Weatherhead C5205X6X8 Carbon Steel SAE 37 Degree (JIC) Flare-Twin Fitting, Adapter, 1/2" NPT Male x 3/8" JIC Male (Pack of 10)
By Weatherhead
In Stock
$27.14
$25.88
You Save: 5%

mpn: C5205X6X8,

4.4 out of 5 stars with 55 reviews
This Eaton Weatherhead C5205X6X8 Flare-Twin adapter connects hydraulic hoses or fittings of different types. It is made of zinc-plated American Iron and Steel Institute (AISI) 12L14 carbon steel for tensile strength, hardness and resistance to corrosion. It has a male 3/8'' Joint Industry Council (JIC) 37-degree flare on one end and male 1/2'' National Pipe Thread (NPT) on the other end for connecting two female threaded fittings. It is 1.69'' in length, with a .297'' inside diameter (ID) and a


Eaton Aeroquip 2021-8-10S Male Connector, Male 37 Degree JIC, Male Pipe Thread, JIC 37 Degree & NPT End Types, Carbon Steel, 1/2 NPT(m) x 5/8 JIC(m) End Size, 5/8" Tube OD (Pack of 4)
By Aeroquip
In Stock
$38.51

mpn: 2021-8-10S,

4.9 out of 5 stars with 31 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Eaton Aeroquip 2215-10-12S Reducer, Female 37 Degree JIC, JIC 37 Degree End Types, Carbon Steel, 3/4 JIC(m) x 5/8 JIC(f) End Size, NULL Tube OD
By Aeroquip
In Stock
$51.87

mpn: 2215-10-12S,

4.4 out of 5 stars with 17 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Eaton Aeroquip 500454-20S 90 Degree Heavy Swivel Nut Elbow, JIC 37 Degree End Types, Carbon Steel, 1-1/4 JIC(f) x 1-1/4 JIC(m) End Size, 1-1/4" Tube OD
By Aeroquip
In Stock
$86.24
$77.15
You Save: 11%

mpn: 500454-20S,

4.1 out of 5 stars with 32 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Parker Hannifin 640F-4-pk20 Cap Nut, 45 Degree Flare Fitting, 1/4" Tube Size, Brass (Pack of 20)
By Parker Hannifin
In Stock
$24.96

mpn: 640F-4-pk20,

4.7 out of 5 stars with 50 reviews
The product is cap nut, Brass, 45 degree flare fitting, 1/4 inch tube size. It features all Brass construction, forged nuts for refrigeration applications, long nuts for vibration and U.L. Listed for Flammable liquids.All brass construction. Forged nuts for refrigeration applications. Long nuts for vibration. U.L. listed for flammable liquids. Metal-to-metal seal.


Eaton Weatherhead C5205X4X8 Carbon Steel SAE 37 Degree (JIC) Flare-Twin Fitting, Adapter, 1/2" NPT Male x 1/4" JIC Male (Pack of 4)
By Weatherhead
In Stock
$20.81
$20.25
You Save: 3%

mpn: C5205X4X8,

4.9 out of 5 stars with 31 reviews
This Eaton Weatherhead C5205X4X8 Flare-Twin adapter connects hydraulic hoses or fittings of different types. It is made of zinc-plated American Iron and Steel Institute (AISI) 12L14 carbon steel for tensile strength, hardness and resistance to corrosion. It has a male 1/4'' Joint Industry Council (JIC) 37-degree flare on one end and male 1/2'' National Pipe Thread (NPT) on the other end for connecting two female threaded fittings. It is 1.68'' in length, with a .172'' inside diameter (ID) and a


Eaton Aeroquip 2024-8-6S 90 Degree Male Elbow, JIC 37 Degree & NPT End Types, Carbon Steel, 1/2 NPT(m) x 3/8 JIC(m) End Size, 3/8" Tube OD, 1/2" Male Pipe Size (Pack of 4)
By Aeroquip
In Stock
$23.93

mpn: 2024-8-6S,

4.9 out of 5 stars with 56 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Eaton Weatherhead 100X8 Brass CA360 Inverted Flare Brass Fitting, Nut, 1/2" Tube OD (Pack of 5)
By Weatherhead
In Stock
$22.96
$22.80

mpn: 100X8,

4.4 out of 5 stars with 36 reviews
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing



Viewing Page 6 of 8

View more products in Tube Fittings.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - massfiscalexposed.org. All Rights Reserved.