Hydraulic Lifting Cylinders - On Sale Now! Save up to 5%


On Sale! Up to 5% off on Hydraulic Lifting Cylinders at Mass Fiscal Exposed. Top brands include Enerpac, Clever Storage by Kesseböhmer, Buyers Products, BVA HYDRAULICS, HYDRAFORE, Parts Express, Balance World Inc, nitipezzo, Esco, Omega, Telesis, MAGISTER HYDRAULICS, Maasdam, United Scientific Supplies, & Simplex. Hurry! Limited time offers. Offers valid only while supplies last.



Enerpac RSM-1000 Flat Jac Single-Acting Low-Height Hydraulic Cylinder with 100-Ton Capacity, Single Port, 0.63" Stroke Length
By Enerpac
In Stock
$1,941.00
$1,853.00
You Save: 5%

mpn: RSM1000, ean: 0662005302406,

4.5 out of 5 stars with 37 reviews
Compact, flat design for use where other cylinders will not fit. Mounting holes permit easy fixturing, and the CR-400 coupler and dustcap is included on all models. These are hard chrome plated high quality steel plungers. Other Features include grooved plunger ends which require no saddle, and a single acting spring return.Single-acting hydraulic cylinder with one port and spring return of single piston rod after 0.63'' stroke. Compact body with handle for use in confined spaces. Baked enamel


Kesseböhmer Gas Tension Lift Piston 250N Part 0013379006 Hydraulic Lift Support
By Clever Storage by Kesseböhmer
In Stock
$21.00

mpn: 0013379006, ean: 4027655469965,

4.2 out of 5 stars with 40 reviews
Replacement Stabilus gas spring, Lift O Mat gas piston, or Kesseböhmer gas Piston. Replacement pistons for your lift door cabinets. These should be replaced in pairs. These pistons are replacements for the Viking Multi-Use Chamber. Model number: VMWC102. The Multi-Use Chamber comes in 3 sizes: 27'' 30'' and 36'' and our pistons can be used in each size. Kesseböhmer Pistons can also be used in Viking Hinge Part # 023663-000 and as a replacement for the Viking Piston part # 010955-000 gray.


Buyers Products SMR50P 50 Gallon Poly Side Mount Reservoir
By Buyers Products
In Stock
$559.99

mpn: SMR50P, ean: 0724920069472,

4.9 out of 5 stars with 10 reviews
Side Mount Polymer Hydraulic Reservoir by Buyers Products is constructed from heavy-duty polymer. Easily adapts to 2 or 3 lines for most dump trailer applications. Not for fuel use.50 gallon gross / 37 gallon useable capacity. Raised anti-slosh fill next w/ 1/4 turn 40 micron chrome filler cap. Fluid sight level/thermometer gauge. United states.


BVA Hydraulics H1004 10 Ton Single Acting 4" Stroke Cylinder
By BVA HYDRAULICS
SKU: #H1004
In Stock
$296.70

sku: H1004, mpn: H1004, ean: 0094717236166,

4.1 out of 5 stars with 58 reviews
BVA H1004 Hydraulic Cylinder with the 10 tons capacity and 4 inch stroke is ideal for lifting and pressing. BVA hydraulic H series cylinders are know in the industry as one of the best cylinders available. BVA Cylinders feature a one piece high grade alloy bearing for side load protection, and cylinders are burnish rolled for a smooth precision finish to prolong seal life. All BVA cylinders come with removable hardened saddles to protect plunger operation. Collar threads, plunger threads and


10 tons 6" Hydraulic Cylinder with Lock Nut Lifting Jack Ram YG-10150LS
By HYDRAFORE
In Stock
$205.00

mpn: YG-10150LS,

4.4 out of 5 stars with 16 reviews
Lightweight single acting hydraulic cylinder with lockout has a lifting capacity of 10tons with a stroke of 6''. A handle for mobility between uses.Tonnage=10. Stroke=6''. Oil Capacity(in3)=15.56. Outside Diameter=4.84''. Closed height=10.39''.


AL120028 - Parts Express, Clutch, Slave Cylinder
By Parts Express
In Stock
$169.00

mpn: AL120028,

4.0 out of 5 stars with 20 reviews
Fits John Deere® Models (2250,2450,2650,2850,3050,3350,All s/n 649119- w/ SG2 Cab),(2355,2555,2755,2955,All w/ SGB Cab),2955 s/n -767516,3055 ; Cross Reference Numbers: AL120028,A-AL120028,510002110,AL66088,510002120,500068420, ; Details: 2 Port, w/ Throw Out Bearing, LUK, Hydraulic Type ;100% New Aftermarket Replacement Part. 1 Year Warranty. Meets or Exceeds OEM Specifications.


10 Ton Hydraulic Pull Back ram Body Shop Frame Porta Power Tools
By Balance World Inc
In Stock
$86.99

mpn: -,

4.6 out of 5 stars with 22 reviews
(Hydraulic Come-along) to be used with a 10 ton porta power10 Ton Maximum ram capacityRugged forged steel hooks5'' pulling distance.(Hydraulic Come-along) to be used with a 10 ton porta power. 10 Ton Maximum ram capacity. Rugged forged steel hooks. 5'' pulling distance..


Durable Solid Steel Construction, 8 Ton Hydraulic Long Manual Ram Jack Pump Engine Lift Hoist Cherry Picker
By nitipezzo
In Stock
$79.72

mpn: DSSC3539, ean: 0799066611212,

4.5 out of 5 stars with 35 reviews
Features: Heat-treated chrome ram for strength and durability 100% factory load-tested for reliability and safety  Specifications: Color: Red Material: Q235 low-carbon steel Load capacity: 8 Ton (17,600 LBS) Min. Lift Height (in.): 24.8'' Max. Lift Height (in.): 44.1'' Weight: 23.1Lbs  Package include: 1 x 8 Ton Long Ram Jack, 1 x Handle  Brand new and durable. Durable solid Steel Construction.. Handle included, nonslip handle. Easily Handles Lift Jobs Up to 8 Tons. Slow


ESCO 10305 10 Ton Hydraulic Ram Cylinder, 10 in. Stroke
By Esco
In Stock
$397.98

mpn: 10305, ean: 0816904021665,

4.1 out of 5 stars with 18 reviews
The ESCO 10305 Hydraulic Ram is built to work with any 10,000 psi hydraulic pump. Works great with limited space and can be used in a variety of applications from construction to tire service and much more. Ram diameter is approximately 2.5 in. and has a stroke of 10.13 in.20,000 lb. load capacity. Retracted height 13.75 in.. General purpose single acting cylinder/ram.


ESCO 10302 10 Ton Hydraulic Ram Cylinder, 4 in. Stroke
By Esco
In Stock
$259.95

mpn: 10302, ean: 0816904021634,

4.9 out of 5 stars with 7 reviews
The ESCO 10302 Hydraulic Ram is built to work with any 10,000 psi hydraulic pump. Works great with limited space and can be used in a variety of applications from construction to tire service and much more. Ram diameter is approximately 2.5 in. and has a stroke of 4.13 in.20,000 lb. load capacity. Retracted height 6.75 in.. General purpose single acting cylinder/ram.


Omega Omega 23221C 22 Ton HYD. Air Hydraulic Axle Jack
By Omega
In Stock
$738.57

mpn: 23221C,

4.8 out of 5 stars with 21 reviews
Omega Lift Automotive 22 Ton Hyd. Air Hydraulic Axle Jack (23221C)Omega omega 23221c 22 ton hyd. Air hydraulic axle jack.


Telesis 18423, Pneumatic Tubes and Fittings 18423
By Telesis
In Stock
$19.80

mpn: 18423,

4.2 out of 5 stars with 31 reviews
Telesis 18423,Pneumatic Tubes And FittingsWeight: 1.67lb. Product Dimensions: 8.00 x 8.00 x 7.00 inches. Condition: New.


BVA 15 TON 4" Stroke Single Acting Hydraulic Cylinder
By BVA HYDRAULICS
SKU: #H1504
In Stock
$404.01

sku: H1504, mpn: H1504, ean: 0094717236241,

4.0 out of 5 stars with 7 reviews
Key Features: - High strength steel construction from gun drilled solid bar - Plunger wipers help seal out dirt - One piece high grade alloy bearing for side load protection and long life - Ideal for lifting and pressing - 3/8 – 18 NPTF high flow couplers - 15 ton, 4 stroke hydraulic H cylinders BVA H1504 15 ton, 4 stroke hydraulic H cylinders are know in the industry as one of the best cylinders available. Cylinders feature a one piece high grade alloy bearing for side load protection , a


Hydraulic Gear Pump 4-18 GPM Straight 3/4" Keyed Shaft CID 1.70 SAE A-2 Bolts CW Aluminum
By MAGISTER HYDRAULICS
In Stock
$121.00

mpn: HGP34K,

4.7 out of 5 stars with 48 reviews
Gear pumps from Magister Hydraulics are manufactured with thru-bolt design; Mounting flange and rear cover made of of rolled aluminium; SAE A-2 mounting flange; This gear pump has high operational and strength specs. The seals installed, reduce internal flow of the fluid and help to achieve a high volumetric efficiency. Displacement (CID): 0.27-1.7 Cubic Inches; Shaft Type - 3/4'' Straight Keyed; Mounting Flange - SAE A-2 Bolts; Outlet Port - SAE 10; Inlet Port - SAE 12; Rotation direction: CW


BVA Hydraulics H1010 10 Ton Single Acting 10" Stroke Cylinder
By BVA HYDRAULICS
SKU: #H1010
In Stock
$315.00

sku: H1010, mpn: H1010, ean: 0094717236197,

4.9 out of 5 stars with 24 reviews
BVA H1010 Hydraulic Cylinder with the 10 tons capacity and 10 inch stroke is ideal for lifting and pressing. BVA hydraulic H series cylinders are know in the industry as one of the best cylinders available. BVA Cylinders feature a one piece high grade alloy bearing for side load protection, and cylinders are burnish rolled for a smooth precision finish to prolong seal life. All BVA cylinders come with removable hardened saddles to protect plunger operation. Collar threads, plunger threads and


50 Ton 2.36" Stroke Low Profile Hydraulic Cylinder
By BVA HYDRAULICS
SKU: #HL5002
In Stock
$606.00

sku: HL5002, mpn: HL5002, ean: 0047077750230,

4.9 out of 5 stars with 43 reviews
Key Features: - Made of high quality steel - Compact design for use in confined spaces - Includes stackable 1 , 2 , and 3 aluminum adapters that conveniently snap into the base of the ram - Rod wiper seals out dirt & contaminations - Specially designed rectangular return spring ensures smooth retraction and long life - Industrial hard-chrome plated ram eliminates scratching & corrosion - 50 tons 2.36 strokes low profile cylinder BVA HL5002 Low Profile Cylinder is 50 tons 2.36 strokes low


Maasdam MPL2B Bottle Jack Standard, 2 Ton, Green (2-(Pack))
By Maasdam
In Stock
$77.22

mpn: MPL2B,

4.8 out of 5 stars with 38 reviews
.


Enerpac RC-308 Single-Acting Alloy Steel Hydraulic Cylinder with 30 Ton Capacity, Single Port, 8.25" Stroke
By Enerpac
In Stock
$1,417.00
$1,360.00
You Save: 4%

mpn: RC308, ean: 0662005301447,

4.0 out of 5 stars with 15 reviews
This Enerpac RC-308 single-acting alloy steel hydraulic cylinder with 30-ton capacity has a round body with one port and spring-return of the single piston rod with 8.25'' stroke for use in general-purpose applications in any position. The single-acting hydraulic cylinder uses liquid pumped through its single port for rod extension and a pretensioned internal spring for expedited rod retraction to produce continued movement. A built-in stop ring prevents the plunger from extending beyond the


Class A Double Scale Glass Graduated Cylinder, 2000mL
By United Scientific Supplies
In Stock
$274.55

mpn: CY3020-2000,

4.4 out of 5 stars with 58 reviews
2000ml Graduated Cylinder, Class A SerializedMeets USP standards, Double metric scale, calibrated to contain. Autoclavable borosilicate glass, Bumper guards protect cylinders. Spout for easy pouring and reduced mess, Heavy uniform wall tubing. Attached glass hexagonal base.


Simplex R254 Steel Spring Return Cylinder, 9690 PSI, 2.56" Bore, 4" Stroke
By Simplex
In Stock
$539.00
$516.65
You Save: 4%

mpn: R254, ean: 0812761020827,

4.2 out of 5 stars with 52 reviews
Simplex R254, Single Acting, Spring Return Steel Cylinder, 25 Ton Capacity with 4'' Stroke, 9,690 psi Operating Pressure is an industry standard, general purpose cylinder that can be used in any position and is an excellent choice for maintenance lifting, machinery positioning or production applications. All Simplex R series models come standard with heavy duty spring for easy retraction and high flow coupler and dust cap. Includes piston and collar threads and base mounting holes for easy fix



Viewing Page 1 of 5

View more products in Cylinders & Accessories.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - massfiscalexposed.org. All Rights Reserved.