Browse Our Catalog

Protective Caps - Page 7


Save on Protective Caps at Mass Fiscal Exposed, Page 7. Top brands include Prescott Plastics, Caplugs, & MOCAP. Hurry! Limited time offers. Offers valid only while supplies last.



Prescott Plastics 3/8 Inch White Round Vinyl Rubber Cap, FDA Food Grade, Flexible Pipe Post Cover (100)
By Prescott Plastics
In Stock
$34.95

ean: 0810021801421,

4.1 out of 5 stars with 37 reviews
High quality Prescott Plastics brand slip-on vinyl soft PVC end caps. These Vinyl End Caps are designed to fit round tubular steel, wood or plastic. Push-fit Vinyl End Caps can stretch onto slightly larger dimensions for a snug fit without tearing, splitting, or shredding. Made in the USA from soft PVC that will hold up for years of use.Fits 3/8'' OD round tube or pipe (*OUTSIDE diameter) & can stretch for a snug fit without tearing or splitting. 1/2'' tall / deep to provide a secure fit.. High-


Caplugs 99394296 Plastic Tapered Cap and Plug. T-14X, PE-LD, Cap OD 1.113" Plug ID 1.284", Red (Pack of 100)
By Caplugs
In Stock
$30.90

mpn: 99394296,

4.1 out of 5 stars with 37 reviews
The T Series was designed to be used as a cap or a plug and are tapered to fit a wide range of applications to protect from contaminants and debris. These caps/plugs may be used for mil Std, sae-type fittings, hydraulic and threaded or non threaded fittings. The tapered design allows the opportunity to cover a vast range of cap or plug applications. Easy to install or remove.:: a: 1.175, b: 1.284, C: 1.113, D: 1.222, E: 0.63, F: 1.44.Designed to be used as a cap or plug and can be used in many a


Caplugs Plastic Threaded Plug for Flared JIC Fittings. PD-30, PE-HD, to Plug Thread Size 3/8-24", Red (Pack of 200)
By Caplugs
In Stock
$45.71

mpn: 99392507,

4.0 out of 5 stars with 57 reviews
The PD series plugs are designed for use on flared JIC fittings and will seal low-pressure requirements with light finger tightening. May be used on 37 degrees flare fittings without gaskets. : : B:.46, C:.50, D:.18, P NTUBE IN: 3/16, TOFITTHRSZ: 3/8-24.Threaded plastic plugs for fared jic fittings. May be used on 37 degree flared fittings. Specs nas 833, nas 815. Ribbed for easy installation and removal. Economically priced.


Caplugs Plastic Cap with Flanges. VCF-2250-24, Vinyl, Cap ID 2.250" Length 1.000", Black (Pack of 12)
By Caplugs
In Stock
$35.09

mpn: 99390341,

4.2 out of 5 stars with 40 reviews
Vice Series caps are designed for easy removal with a flange at the closed end large enough to grasp, yet small enough to not interfere with the application. Wide range of sizes easy to use vast color range available material: vinyl standard color: black:: a: 2.250, b: 0.070, C: 1.000.Flexible vinyl material with a wide range of diameter and length sizes. Easy to use - push on, use flange to pull off. Durable protective closure. Reference your inner diameter to select size. Economically priced.


Wide Flange Plug Caps Wider Flange Tapered Plug Cap, LDPE Red MOCAP WF.820/.930RD1 (qty1000)
By MOCAP
In Stock
$120.32

mpn: WF.820/.930RD1-M,

4.6 out of 5 stars with 43 reviews
MOCAP Wide Flange Tapered Plastic Plug Caps are inexpensive dual function closures which can be used as either a plug or a cap. These tapered polyethylene plug caps are made from tough, but flexible polyethylene to form a secure fit, yet are easily removed. These Plastic Plugs feature a wider flange than our standard T Series plug caps, adding protection for external surfaces and preventing the plug from accidentally being pushed all the way into or through an opening. Outside Length: 0.59in / F


Caplugs 99394679 Plastic Threaded Plug for Pipe Fittings. P-68H, PE-HD, to Plug Thread Size 3/4 NPT", Red (Pack of 40)
By Caplugs
In Stock
$30.65

mpn: 99394679,

4.9 out of 5 stars with 9 reviews
The P Series plugs plastic threaded plugs are designed to keep out moisture, dirt and other contaminants in pipe fittings. : : A:.62, B:.62, C:.25, TOFITTHRSZ: 3/4 NPT.For tapered and straight threads. Wide range of sizes. Keeps out contaminants. Economically priced.


Caplugs ZCE3151AA1 Plastic Cap for Threaded Pipe Ends. CE-315, PE-LD, to Cap Pipe Size 1 1/2 NPT", Black (Pack of 40)
By Caplugs
In Stock
$36.54

mpn: ZCE3151AA1,

4.8 out of 5 stars with 48 reviews
CE Series plastic pipe caps are durable and provide pipe end protection against damage and debris as well as Keep dirt and contaminants out of the pipe. : : A: 1.90, B: 1.00, TOFITTHRSZ: 1 1/2 NPT.Npt sizes 1/4'' thru 12''. Nps sizes 14'' thru 64''. Solid one piece design. Keeps out contaminants. Protects pipe end walls.


Round Vinyl Grips - Textured/Black .500-4.50 Length Grip Textured Black MOCAP RVGC9097TX-30 (qty21)
By MOCAP
In Stock
$32.32

mpn: RVGC9097TX-30-P,

4.4 out of 5 stars with 41 reviews
MOCAP dip molded vinyl plastic grips improve appearance and comfort for items with handles, levers or grips. Our round vinyl grips are available in a variety of materials, colors, hardness durometers (soft, semi-rigid or hard), diameters, and lengths (some grip sizes can be produced up to 21' long) to fit your application.Choose from our many material options including our traditional smooth & glossy vinyl plastic or our textured rubber like material. Flexible but durable materials can stretch o


Round Vinyl Caps .625 X 1/2 Std Red Cap MOCAP RVCC9034R-5 (qty100)
By MOCAP
In Stock
$33.87

mpn: RVCC9034R-5-P,

4.5 out of 5 stars with 11 reviews
MOCAP Round Vinyl Plastic Caps offer an attractive, quality finished appearance to consumer and industrial products. Our caps also provide inexpensive but tough protection to your valuable product line. Outside Length: 0.50in / Inside Diameter: 0.63in / Outside Diameter: 0.75inMaterial: Vinyl. Flexible Yet Durable - Won't Split, Tear or Shred. Printable. Use as Thread Protector or End Cap.


(Pack of 100) Caplugs: 5/16" to 3/8" Round Black Vinyl Flexible End Cap - Bolt Screw Thread Protector Safety Cover | for 0.312 Inch Pipe Post Tubing Rod OD Cover - 1" inside Height.
By Caplugs
In Stock
$29.95

ean: 0789704030291,

4.8 out of 5 stars with 59 reviews
(Pack of 100) Caplugs: 5/16'' to 3/8'' Round Black Vinyl Flexible End Cap - Bolt Screw Thread Protector Safety Cover | for 0.312 Inch Pipe Post Tubing Rod OD Cover - 1'' inside Height.(Pack of 100) Caplugs: 5/16'' to 3/8'' Round Black Vinyl Flexible End Cap - Bolt Screw Thread Protector Safety Cover | for 0.312 Inch Pipe Post Tubing Rod OD Cover - 1'' inside Height.(Pack of 100) Caplugs: 5/16'' to 3/8'' Round Black Vinyl Flexible End Cap - Bolt Screw Thread Protector Safety Cover | for 0.312 Inc


Caplugs Z1972Q1 Plastic Tapered Cap and Plug. T-1972, PE-LD, Cap OD 1.664" Plug ID 1.85", Red (Pack of 70)
By Caplugs
In Stock
$43.48

mpn: Z1972Q1,

4.8 out of 5 stars with 55 reviews
The T Series was designed to be used as a cap or a plug and are tapered to fit a wide range of applications to protect from contaminants and debris. These caps/plugs may be used for mil Std, sae-type fittings, hydraulic and threaded or non threaded fittings. The tapered design allows the opportunity to cover a vast range of cap or plug applications. Easy to install or remove.:: a: 1.72, b: 1.85, C: 1.664, D: 1.794, E: 0.72, F: 2.03.Designed to be used as a cap or plug and can be used in many app


Caplugs 99394320 Plastic Tapered Cap and Plug. T-230, PE-LD, Cap OD 2.074" Plug ID 2.312", Red (Pack of 40)
By Caplugs
In Stock
$33.53

mpn: 99394320,

4.7 out of 5 stars with 12 reviews
The T Series was designed to be used as a cap or a plug and are tapered to fit a wide range of applications to protect from contaminants and debris. These caps/plugs may be used for mil Std, sae-type fittings, hydraulic and threaded or non threaded fittings. The tapered design allows the opportunity to cover a vast range of cap or plug applications. Easy to install or remove.:: a: 2.136, b: 2.312, C: 2.074, D: 2.25, E: 1, F: 2.56.Designed to be used as a cap or plug and can be used in many appli


Caplugs QCPT3Q1 Plastic Center Pull Tab Tapered Plug. CPT-3, PE-LD, Cap OD 0.56" Plug ID 0.428", Red (Pack of 1000)
By Caplugs
In Stock
$104.30

mpn: QCPT3Q1,

4.4 out of 5 stars with 20 reviews
The CPT Series plugs offer an integral center-pull tab which facilitates insertion and removal of the plug. The tab is molded fully into the end and side walls of the plug, and will not break off during plug removal. Concentric design allows a straight-pull removal.:: a: 0.362, b: 0.428, C: 0.56, D: 0.38.Tapered design. Ergonomically friendly. Pull tab for easy removal. Flanged to seat on fitting. Economically priced.


Caplugs 99395209 Plastic Plug for Square Tubing. SQR-2-4-8, PE-LD, to fit Square Tube Size OD2.000" Wall Thickness 4-8 Ga. (.238-.165)", Black (Pack of 20)
By Caplugs
In Stock
$63.11

mpn: 99395209,

4.3 out of 5 stars with 17 reviews
SQR Series square plugs feature a series of externally tapered ribs designed to accommodate a wide range of tubing gauges while also satisfying the fit adjustments on tubing with inside dimensional fluctuations. The exterior ribs are designed to provide a sure grip inside a tube without the unsightly plastic shavings found on many straight wall glide installations. Will not rust or corrode. : : A: 2.000, B: 0.52, TUBEOD IN: 2.000, WALL THICK: 4-8 Ga. (.238-.165).Broad selection of size and gauge


Caplugs Plastic Threaded Plug for Flared JIC Fittings. PD-50, PE-HD, to Plug Thread Size 1/2-20", Red (Pack of 200)
By Caplugs
In Stock
$52.79

mpn: 99392509,

4.9 out of 5 stars with 29 reviews
The PD series plugs are designed for use on flared JIC fittings and will seal low-pressure requirements with light finger tightening. May be used on 37 degrees flare fittings without gaskets. : : B:.53, C:.68, D:.25, P NTUBE IN: 5/16, TOFITTHRSZ: 1/2-20.Threaded plastic plugs for fared jic fittings. May be used on 37 degree flared fittings. Specs nas 833, nas 815. Ribbed for easy installation and removal. Economically priced.


Prescott Plastics 5/8 Inch Round Black Vinyl End Cap, Flexible Pipe Post Rubber Cover (100)
By Prescott Plastics
In Stock
$42.95

ean: 0810021800400,

4.4 out of 5 stars with 28 reviews
High quality Prescott Plastics brand slip-on vinyl soft PVC end caps. These Vinyl End Caps are designed to fit round tubular steel, wood or plastic. Push-fit Vinyl End Caps can stretch onto slightly larger dimensions for a snug fit without tearing, splitting, or shredding. Made in the USA from soft PVC that will hold up for years of use. **DIMENSIONS ARE FOR CAP INSIDE DIAMETER**Fits 5/8'' round OD tube or pipe ( 5/8'' OUTSIDE diameter) & can stretch up to 1/16'' larger for a snug fit without te


Caplugs 99394818 Plastic Cap for Split-Flange Connections. SF-36, PE-LD, to Cap Nominal Flange Size to Cap Ferrule Size 2-1/2", Natural (Pack of 36)
By Caplugs
In Stock
$42.27

mpn: 99394818,

4.7 out of 5 stars with 58 reviews
The SF Series is designed to protect four-bolt split-flange connections. The caps push on with an internal bead for a positive locking grip. The O-ring remains visible after closure is applied. : : C NFS IN: , CAPFERRULE: 2-1/2, A: 3.06, B:.32.To cap nominal flange sizes range from 1/2'' thru 4''. Clear material allows you to see installed O-ring. For standard pressure sizes. Economically priced.


Caplugs 99190918 Cap for Threaded Connectors, Plastic, To Cap Nominal Thread Size 1-1/8", EC-18, RED (Pack of 500)
By Caplugs
In Stock
$84.21

mpn: 99190918,

4.1 out of 5 stars with 21 reviews
The protect Series caps fit 36 and 86 pin Champ 050 Series connectors and 50-pin Champ Type connectors. Designed for easy application and removal in areas not readily accessible. Can be installed over threads or cylindrical surfaces.:: C nts: 1-1/8, a: 1.093, b: 1.33, C: 0.56, D: 1.15.Specs: nas 813 & nas 831. Nominal thread size range 1/4'' thru 5''. Flanged for easy installation and removal. Keeps out contaminants. Economically priced.


Caplugs Q216TQ1 Plastic Sleeve Cap for Tube Ends. SC-216-T, PE-LD, Cap ID .375" Length .46", Red (Pack of 4000)
By Caplugs
In Stock
$318.36

mpn: Q216TQ1,

4.4 out of 5 stars with 36 reviews
SC Series sleeve caps are designed to fit outside diameters of tubing with a snug friction grip. These caps are ideal for capping and protecting both threaded and non-threaded tubing and rod ends. They also make excellent masks for painting, plating or grit-blasting operations.:: a:.375, b:.46.Designed to fit outside diameters of tube ends. Over 128 different diameters and corresponding lengths. Will cap threaded and non-threaded tubing. Versatile design. Economically priced.


Caplugs 99191205 Plastic Cap for Threaded Connectors. RC-7, PE-LD, To Cap Thread Size 7/16 Cap ID 0.42" Length 0.59", Red (Pack of 1000)
By Caplugs
In Stock
$87.57

mpn: 99191205,

4.8 out of 5 stars with 7 reviews
The RC Series caps for threaded connectors originated for the automotive and air conditioning industries, but are now suitable for a multitude of applications. They can be installed to fit threaded or smooth cylindrical surfaces.:: cap thread: 7/16, a: 0.42, b: 0.59, C: 0.57.Straight cap design. Popular in automotive and air conditioning markets. Wide range of thread size protectors available. Durable design. Economically priced.



Viewing Page 7 of 8

View more products in Hydraulics, Pneumatics & Plumbing.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - massfiscalexposed.org. All Rights Reserved.