Push-to-connect Fittings - Page 8 - Mega Sale! Save up to 25%


Mega Sale! Up to 25% off on Push-to-connect Fittings at Mass Fiscal Exposed, Page 8. Top brands include EDGE INDUSTRIAL, Parker Hannifin, Generic, Beduan, Parker Legris, PneumaticPlus, Avanty, Parker, MettleAir, CAI - JOHN GUEST, & GPD. Hurry! Limited time offers. Offers valid only while supplies last.



EDGE INDUSTRIAL 1/8'' Hose ID to 1/4'' Male NPT MNPT Straight Brass Fitting Fuel / AIR / Water / Oil / Gas / WOG (Qty 10)
EDGE INDUSTRIAL 1/8" Hose ID to 1/4" Male NPT MNPT Straight Brass Fitting Fuel / AIR / Water / Oil / Gas / WOG (Qty 10)
By EDGE INDUSTRIAL
In Stock
$16.95

mpn: E.I. BARB 27, ean: 0691023900042,

4.1 out of 5 stars with 25 reviews
1/8'' Hose ID x 1/4'' Male NPT Brass Barb Fitting. 150 PSI maximum working pressure. -40° to 160° temperature rating. Not deemed lead free. Not for use with potable water. Please Note: NPT Thread size is NOT determined by its outside thread diameter in inches. Please review our attached NPT sizing chart to cross reference NPT thread size to linear inches10 Pack of 1/8'' Hose ID x 1/4'' Male NPT Brass Barb Fittings. 150 PSI maximum working pressure, -40° to 160° Temperature Rating. PLEASE


Parker Hannifin 6316 56 00WP2-pk10 LIQUIfit Bulkhead Union Fitting, Polymer Body, 1/4" Push-to-Connect Tube x 1/4" Push-to-Connect Tube (Pack of 10)
By Parker Hannifin
In Stock
$38.04

mpn: 6316 56 00WP2-pk10,

4.4 out of 5 stars with 45 reviews
This Liquifit1/4'' OD tube bulkhead union requires a 1/2'' hole size to mount. The maximum wall thickness is .33''. the overall Length is 1.18''.Stainless steel grab ring. Epdm d-seal. Meets requirements of fda, nsf 51 and nsf 61. D-seal provides a positive seal on the O.D. Of the tube, in both static and Dynamic positions. High chemical resistance.


Parker Hannifin 164PLP-4-pk5 Prestolok PLP Union Tee Push-to-Connect Fitting, Nickel Plated Brass, 1/4" Push-to-Connect Tube x 1/4" Push-to-Connect Tube (Pack of 5)
By Parker Hannifin
In Stock
$35.10

mpn: 164PLP-4-pk5,

4.5 out of 5 stars with 9 reviews
Item: union tee, tube fitting material: nickel plated Brass, fitting connection Type: tube, tube size: 1/4'', max. Pressure: 300 psi, Temp. Range: 0 Degrees to 200 Degrees F.Compact one piece fitting. Swivels on all male threaded shapes for assembly in tight places and for precise positioning. Pre-applied whistle acrylic sealant. Corrosion resistance. Push-to-connect for fast assembly and disassembly.


BlastCase Pneumatic Push To Connect Fitting 3/8'' OD Tube Bulkhead Union Connector (Pack of 5)
BlastCase Pneumatic Push To Connect Fitting 3/8" OD Tube Bulkhead Union Connector (Pack of 5)
By Generic
In Stock
$22.48

mpn: JCPM06, ean: 0758330667065,

4.9 out of 5 stars with 41 reviews
Product Description Simple installation pneumatic push to connect fitting.Designed for polyurethane or nylon tubing. Click ''honest-f'' to choose the product you want in our shop. Features - Materies: nickel plating brass C37700,plastic. - Net Weight: 56.11g/pc. - Type: Bulkhead Union. - Tube Size: 3/8'' OD. - Operating Pressure:0-150psi. - Quick and simple installation,designed for the polyurethane or nylon tubing. Important Note Pay attention to the column of size and color, you could fin


Beduan 304 Stainless Steel Compression Fitting Ferrule, 5/16'' Tube OD x 3/8'' NPT Male, Straight Adapter Connect with Double Ferrules
Beduan 304 Stainless Steel Compression Fitting Ferrule, 5/16" Tube OD x 3/8" NPT Male, Straight Adapter Connect with Double Ferrules
By Beduan
In Stock
$16.99

mpn: 1kl-08650-PCINCH, ean: 0020064544180,

4.9 out of 5 stars with 47 reviews
Type:Compression Tube FittingMaterial:304 Stainless SteelPipe and tube Fitting Reducer Union Connector are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries.304 Stainless Steel Compression fittings do not require tools or sealants,and are useful in installations where a heat source, such as a soldering torch, is prohibited.When purchasing fittings, consider the application, as this will affect material type, shape, si


Parker Legris 364PLP-4-pk5 Push-to-Connect Fitting, Nylon, Union Tee, 1/4'' Tube OD (Pack of 5)
Parker Legris 364PLP-4-pk5 Push-to-Connect Fitting, Nylon, Union Tee, 1/4" Tube OD (Pack of 5)
By Parker Legris
In Stock
$27.49
$27.47

mpn: 364PLP-4-pk5,

4.6 out of 5 stars with 25 reviews
This 1/4'' Tube X 1/4'' Tube x 1/4'' Tube Prestolok Nylon Union Tee is 1.86'' long and .89'' high overall.Union tee to connect two tubes at 90-degree angles to a third tube. Push-to-connect tube connections on all three ends. Nylon for strength and flexibility, abrasion resistance, light weight, and resistance to crushing and cracking. Handles pressures up to 290 psi (20 bar), operating temperature range of-20 to +80 degrees C (-4 to +176 degrees F), and a vacuum capability of 755 mm Hg. Meets r


PneumaticPlus PL-5/16-N2 Push to Connect Tube Fitting, Male Elbow - 5/16'' Tube OD x 1/4'' NPT Thread (Pack of 10)
PneumaticPlus PL-5/16-N2 Push to Connect Tube Fitting, Male Elbow - 5/16" Tube OD x 1/4" NPT Thread (Pack of 10)
By PneumaticPlus
In Stock
$23.22

mpn: PL-5/16-N2,

4.8 out of 5 stars with 54 reviews
PneumaticPlus offers composite fittings in wide range of sizes, body styles and thread types for various pneumatic applications.Body Style: Male Elbow. 5/16'' Tube OD x 1/4'' NPT Thread. Fluid Type: Air Only. Applicable Tube: Polyurethane and Nylon.


PneumaticPlus Air Supsension Push-in Lock Fitting, Taper Swivelling Elbow, Male 3/8'' Tube X 1/4'' NPT Thread, DOT Approved (Pack of 5)
PneumaticPlus Air Supsension Push-in Lock Fitting, Taper Swivelling Elbow, Male 3/8" Tube X 1/4" NPT Thread, DOT Approved (Pack of 5)
By PneumaticPlus
In Stock
$27.15

mpn: PT15 3/8 1/4, ean: 0841693178948,

4.4 out of 5 stars with 11 reviews
3/8'' Tube X 1/4'' NPT Thread. DOT Push-in Fitting: Taper Swivelling Elbow, Male. Max Pressure: 261 PSI/ Temp: -40 F ~ 302 F. Pneumatic Circuits for Truck and Trailers: Air Suspension, Brake Systems, Transmissions, Locking door and window, Seat Adustment, Instrumentation, Air Conditioning System, Horn, Wiper Motor, Valve, Cylinders and accessories.. Push in Fitting for Vehicles applications complying with DOT FMVSS 571.106, SAE J2493-3 e SAE J1131 specs..


Avanty Push in to Connect Tubing Quick Cap Plug Fitting, 1/4'' OD (Pack of 20)
Avanty Push in to Connect Tubing Quick Cap Plug Fitting, 1/4" OD (Pack of 20)
By Avanty
In Stock
$18.99

mpn: PPF,

4.0 out of 5 stars with 41 reviews
Material: Body: Nickel Plated Brass,POB, PBT O-ring: NBR Claw: stainless steelFluid medium: Compressed air, vacuum;. Working Pressure: 0-990Kpa;. Negative pressure: -100 Kpa;. Operation Temperature: 0-70℃;.


Parker 364PLP-6M-8M-pk5 Composite Push-to-Connect Fitting, Tube to Tube, Glass Reinforced 6.6, Push-to-Connect Tee, 6 mm and 8 mm, Nylon (Pack of 5)
Parker 364PLP-6M-8M-pk5 Composite Push-to-Connect Fitting, Tube to Tube, Glass Reinforced 6.6, Push-to-Connect Tee, 6 mm and 8 mm, Nylon (Pack of 5)
By Parker
In Stock
$52.32
$40.14
You Save: 23%

mpn: 364PLP-6M-8M-pk5,

4.5 out of 5 stars with 39 reviews
Composite push-to-connect fittings provide a simple way of connecting tubes to a fitting. Prestolok composite fittings reduce assembly time by eliminating the use of a sleeve and tightening of a nut. Manufactured by Parker, Made in United States.Glass reinforced nylon 6.6 body. Stainless steel grab ring. Nitrile D-seal provides a positive seal on the O.D. of the tube, in both static and dynamic positions. 100 percent leak tested in production. Date coding to guarantee quality and traceability.


PneumaticPlus PC-5/32-N2 Push to Connect Tube Fitting, Male Straight - 5/32'' Tube OD x 1/4'' NPT Thread (Pack of 10)
PneumaticPlus PC-5/32-N2 Push to Connect Tube Fitting, Male Straight - 5/32" Tube OD x 1/4" NPT Thread (Pack of 10)
By PneumaticPlus
In Stock
$21.99
$16.49
You Save: 25%

mpn: PC-5/32-N2,

4.1 out of 5 stars with 16 reviews
PneumaticPlus offers composite fittings in wide range of sizes, body styles and thread types for various pneumatic applications.Body Style: Male Straight. 5/32'' Tube OD x 1/4'' NPT Thread. Fluid Type: Air Only. Applicable Tube: Polyurethane and Nylon.


Parker 368PLP-8M-4G-pk5 Composite Push-to-Connect Fitting, Tube to Pipe, Glass Reinforced 6.6, Push-to-Connect and BSPP Y Connector, 8 mm and 1/4'', Nylon (Pack of 5)
Parker 368PLP-8M-4G-pk5 Composite Push-to-Connect Fitting, Tube to Pipe, Glass Reinforced 6.6, Push-to-Connect and BSPP Y Connector, 8 mm and 1/4", Nylon (Pack of 5)
By Parker
In Stock
$94.80
$87.12
You Save: 8%

mpn: 368PLP-8M-4G-pk5,

4.0 out of 5 stars with 59 reviews
Composite push-to-connect fittings provide a simple way of connecting tubes to a fitting. Prestolok composite fittings reduce assembly time by eliminating the use of a sleeve and tightening of a nut. Manufactured by Parker, Made in United States.Glass reinforced nylon 6.6 body. Stainless steel grab ring. Nitrile D-seal provides a positive seal on the O.D. of the tube, in both static and dynamic positions. 100 percent leak tested in production. Date coding to guarantee quality and traceability.


MettleAir MTE 5/16-1/4 Push to Connect Tee T Reducer Union Fitting, 5/16'' OD - 1/4'' OD (Pack of 10)
MettleAir MTE 5/16-1/4 Push to Connect Tee T Reducer Union Fitting, 5/16" OD - 1/4" OD (Pack of 10)
By MettleAir
In Stock
$45.87

mpn: MTE 5/16-1/4,

4.8 out of 5 stars with 8 reviews
Designed for Polyurethane or Nylon tubing. Quick and Reliable connections. Reusable: Multiple connections/disconnections. Convenient elliptical sleeve configuration. Specifications: Fluid Type: Air, Operating Pressure: 0- 150 PSI / 0 - 9.9 kgf / cm2 (0-990kPa), Working Temperature: 32-140°F / 0-60°C, O-Ring: NBR (Acrylonitrile butadiene rubber), Plastic Body: PBT (Polybutylene terephthalate), Packing: NBR (Acrylonitrile butadiene rubber), Back Ring: POM (Polyoxymethylene plastic), Lock Claws:


John Guest Acetal Copolymer Reducer Union, 3/8'' x 1/4'' Tube Size - pkg. of 10
John Guest Acetal Copolymer Reducer Union, 3/8" x 1/4" Tube Size - pkg. of 10
By CAI - JOHN GUEST
In Stock
$47.39
$47.36

mpn: PI201208S-PK10, ean: 0696505028399,

4.4 out of 5 stars with 49 reviews
Gray Acetal Push-In Fittings Max. pressure: 150 psi Temp. range: -14° to 167°F (air); 33° to 140°F (water)Push-to-connect fittings have nitrile O-ring seal and stainless steel teeth. Use with PVC, polyethylene, nylon, polyurethane, brass, copper, and mild steel tubing. Check valves and shutoff valves priced and sold separately. Fittings are suitable for potable water, food, chemical, cleaning, and beverage dispensing applications, as well as pneumatics, reverse osmosis, plumbing, spraying a


Parker 68PLPR-4-0-pk20 Prestolok PLP Push-to-Connect Instant Fitting, Tube to Pipe, Nickel Plated Brass, Push-to-Connect and UNF Round Body Connector, 1/4'' and 10''-32 (Pack of 20)
Parker 68PLPR-4-0-pk20 Prestolok PLP Push-to-Connect Instant Fitting, Tube to Pipe, Nickel Plated Brass, Push-to-Connect and UNF Round Body Connector, 1/4" and 10"-32 (Pack of 20)
By Parker
In Stock
$130.87

mpn: 68PLPR-4-0-pk20,

4.1 out of 5 stars with 12 reviews
Parker's Prestolok PLP fittings offer improved throughput, increased efficiency, smaller footprints, faster assembly and leak-free innovation. Manufactured by Parker, Made in United States.Compact one piece fitting. Swivels on all male threaded shapes for assembly in tight places and for precise positioning. Pre-applied whistle acrylic sealant. Npt, unf, bspt, bspp and metric threads. Corrosion resistance.


Legris 3115 62 22DOT Nylon & Nickel-Plated Brass Push-To-Connect Fitting, Complies with DOT, Inline Connector, 1/2'' Tube OD x 1/2'' NPT Male
Legris 3115 62 22DOT Nylon & Nickel-Plated Brass Push-To-Connect Fitting, Complies with DOT, Inline Connector, 1/2" Tube OD x 1/2" NPT Male
By Parker Legris
In Stock
$99.95

mpn: 3115 62 22DOT,

4.8 out of 5 stars with 55 reviews
This Legris 3115 inline connector is a nylon and nickel-plated brass push-to-connect fitting for connecting a tube to a female threaded connection in a straight run. It has a push-to-connect tube connection on one end and male National Pipe Taper (NPT) threads on the other end for connecting to female threaded pipes. The NPT threads create a tighter seal than straight threads. This fitting is made of nylon and nickel-plated brass — nylon for strength and flexibility, abrasion resistance, light


Parker Hannifin 164PLP-2-pk5 Prestolok PLP Union Tee Push-to-Connect Fitting, Nickel Plated Brass, 1/8" Push-to-Connect Tube x 1/8" Push-to-Connect Tube (Pack of 5)
By Parker Hannifin
In Stock
$48.12

mpn: 164PLP-2-pk5,

4.3 out of 5 stars with 48 reviews
The 1/8''Tube X 1/8''Tube X 1/8''Tube Prestolok Brass Union Tee is 1.48'' long, .74'' center line to end, and has a .094'' diameter flow. Materials of construction are nickel plated brass bodies, nitrile O-rings, polyacetal push buttons and stainless steel grab rings. Recommended tubing is LLDPE, PP, Nylon, and 90 A or 95A polyurethane tubing. Fittings are rated up to 300 PSI depending on tubing. Temperature range is 0 degree F to 200 degree F.Compact one piece fitting. Swivels on all male threa


Avanty 304 Stainless Steel Push to Connect Fitting, 90 Degree Male Elbow, 12mm Tube OD x 3/8'' NPT Male (Pack of 5)
Avanty 304 Stainless Steel Push to Connect Fitting, 90 Degree Male Elbow, 12mm Tube OD x 3/8" NPT Male (Pack of 5)
By Avanty
In Stock
$47.99

mpn: 304PL,

4.3 out of 5 stars with 18 reviews
Suitable for PU, PV, PVC, nylon, telfon, polyurethane tube.Seal O-ring:Fluorine rubber. Working Temperature:-30℃-250℃/-22℉-480℉. Working Pressure: 0.1MPA-4MPA. Made of 304 Stainless Steel for resisting corrosion.. Easy to install and reliable sealing..


10x DOT Nylon Air Brake Tubing Union Brass Fittings for 1/2'' OD Tube
10x DOT Nylon Air Brake Tubing Union Brass Fittings for 1/2" OD Tube
By GPD
In Stock
$37.99

mpn: 777KIT1988, ean: 0842995131167,

4.1 out of 5 stars with 49 reviews
10 Pack of 1/2'' OD Tube Unions10 Pack of 1/2'' OD Tube Unions/UL.


MettleAir MTL 1/4-N01 Push to Connect L Shaped Elbow Male Fitting, 1/4'' OD, 1/8'' NPT (Pack of 10)
MettleAir MTL 1/4-N01 Push to Connect L Shaped Elbow Male Fitting, 1/4" OD, 1/8" NPT (Pack of 10)
By MettleAir
In Stock
$38.20
$37.93

mpn: MTL 1/4-N01,

4.8 out of 5 stars with 10 reviews
Designed for Polyurethane or Nylon tubing. Quick and Reliable connections. Reusable: Multiple connections/disconnections. Convenient elliptical sleeve configuration. Metallic body made of non-corrosive, non-contaminant Nickel-plated Brass. Pre-coated threads are ready to use without additional sealing. Hexagonal/Allen wrench tightening. Specifications: Fluid Type: Air, Operating Pressure: 0- 150 PSI / 0 - 9.9 kgf / cm2 (0-990kPa), Working Temperature: 32-140°F / 0-60°C, Metallic Body: Nickel-p



Viewing Page 8 of 10

View more products in Tube Fittings.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - massfiscalexposed.org. All Rights Reserved.