Push-to-connect Fittings - Page 9 - Blowout Sale! Save up to 59%


Blowout Sale! Up to 59% off on Push-to-connect Fittings at Mass Fiscal Exposed, Page 9. Top brands include Colder, Parker Hannifin, EDGE INDUSTRIAL, Usabc, uxcell, PneumaticPlus, Parker, MacCan USA, Inc., Beduan, Metalwork, John Guest, Wanm Pneumatic, Avanty, Janatics Pneumatic, & TigerBite. Hurry! Limited time offers. Offers valid only while supplies last.



CPC (Colder) NS4D17006 Non-Spill Quick-Disconnect, PP Body, 3/8" ID, NS4 31603-31
By Colder
In Stock
$75.11
$30.93
You Save: 59%

mpn: 3160331,

4.8 out of 5 stars with 49 reviews
Virtually eliminate any loss of product with this leak-free design. Couplings are made of polypropylene with an EPDM O-Ring for excellent chemical resistance. For a complete fitting, order one body and one insert. All bodies will mate with inserts to make a fitting that will work for multiple applications. Less than 0.10Ml spillage one-hand operation.Product Type: quick disconnect fittings. Material: polypropylene. Tubing ID (in.): 0.375. Tubing ID: 3/8 inch. Brand: colder.


Parker Hannifin 68PLP-5/32-0-pk10 Prestolok PLP Male Connector Push-to-Connect Fitting, Nickel Plated Brass, 5/32" Push-to-Connect Tube x 10-32 UNF (Pack of 10)
By Parker Hannifin
In Stock
$40.68

mpn: 68PLP-5/32-0-pk10,

4.9 out of 5 stars with 32 reviews
The product is Prestolok PLP Male Connector Push-to-Connect Fitting, Nickel Plated Brass, 5/32'' Push-to-Connect Tube x 10-32 UNF. It features Compact one piece fitting, Swivels on all Male threaded shapes for assembly in tight places and for precise positioning, Pre-applied white acrylic sealant and corrosion resistance.Compact one piece fitting. Swivels on all male threaded shapes for assembly in tight places and for precise positioning. Pre-applied whistle acrylic sealant. Corrosion resistanc


EDGE INDUSTRIAL 3/4" Hose ID to 3/4" Male NPT MNPT Straight Brass Fitting Fuel / AIR / Water / Oil / Gas / WOG (Qty 10)
By EDGE INDUSTRIAL
In Stock
$45.95

mpn: E.I. BARB 23, ean: 0691023900509,

4.3 out of 5 stars with 44 reviews
3/4'' Hose ID x 3/4'' Male NPT Brass Barb Fitting. 150 PSI maximum working pressure. -40° to 160° temperature rating. Not deemed lead free. Not for use with potable water. Please Note: NPT Thread size is NOT determined by its outside thread diameter in inches. Please review our attached NPT sizing chart to cross reference NPT thread size to linear inches10 Pack of 3/4'' Hose ID x 3/4'' Male NPT Brass Barb Fittings. 150 PSI maximum working pressure, -40° to 160° Temperature Rating. PLEASE NOT


3/4" Push Fit Coupling, Push to Connect Lead Free Brass Caps Connector Fitting for Copper PEX CPVC Pipe(5-Pack)
By Usabc
In Stock
$38.99

mpn: #001042,

4.8 out of 5 stars with 27 reviews
Product Description 3/4 Inch Straight Push Plumbing Fitting Push fittings are designed for convenience. This lead-free brass fitting is easy to both install and remove. It helps create better water flow and can be easily connected to pipes of another material. For example, it can connect to copper, PEX, and CPVC. It also helps repair minor holes in pipes, leaving a tight, leak-free seal. Those are good reasons as to why it works perfectly for residential or commercial jobs. They are less t


uxcell Plastic Straight Union Push to Connect Tube Fitting 8mm OD Push Fit Lock 50pcs
By uxcell
In Stock
$29.99
$29.89

mpn: a18092200ux0196,

4.6 out of 5 stars with 39 reviews
Product Features:Product Name : Push to Connect FittingsModel : PU8;Color : Black;Net Weight : 355g;Material : Plastic;Type: Straight Connector;Two Tube Size (OD) : 8mm = 5/16''Operating Pressure : 0-1MPa;Guaranteed pressure resistance : 1.5MPa;Operating temperature:-10 - 60 Degree Celsius;Dimension : 37mm x 15mm / 1.5-inch x 0.6-inch (L x D ); Package Content:50(-/+20%)pcs x Push to Connect Fittings Description:1.5/16'' Push to Connect Fittings designed for using to connect with polyethylene,


PneumaticPlus PUT-1/2 Push to Connect Tube Fitting, Union Tee - 1/2" Tube OD x 1/2" Tube OD (Pack of 5)
By PneumaticPlus
In Stock
$22.40
$18.65
You Save: 17%

mpn: PUT-1/2,

4.6 out of 5 stars with 47 reviews
PneumaticPlus offers composite fittings in wide range of sizes, body styles and thread types for various pneumatic applications.Body Style: Union Tee. 1/2'' Tube OD x 1/2'' Tube OD. Fluid Type: Air Only. Applicable Tube: Polyurethane and Nylon.


PneumaticPlus PUT-5/16 Push to Connect Tube Fitting, Union Tee, 5/16 Tube OD (Pack of 10)
By PneumaticPlus
In Stock
$28.99
$19.99
You Save: 31%

mpn: PUT Series,

4.6 out of 5 stars with 21 reviews
PneumaticPlus offers composite fittings in wide range of sizes, body styles and thread types for various pneumatic applications.Body Style: Union Tee. 5/16'' Tube OD x 5/16'' Tube OD. Fluid Type: Air Only. Applicable Tube: Polyurethane and Nylon.


Parker 639PLP-8-pk10 Composite Push-to-Connect Fitting, Tube to Plug-in Stem, 1/2" (Pack of 10)
By Parker
In Stock
$27.33
$20.16
You Save: 26%

mpn: 639PLP-8-pk10,

4.3 out of 5 stars with 59 reviews
Being the world's leader in push-to-connect fitting technology Parker's Prestolok PLP composite fittings provide a simple way of connecting tubes to a fitting in order to create a fluid distribution network. Prestolok composite fittings reduce assembly time by eliminating the use of a sleeve and tightening of a nut required in compression style fittings. Simply push the tubing into the fitting until it bottoms. To disassemble, press the release button, hold against the body and pull tubing from


MacCan Pneumatic Wholesale PL5/16-N1 (Male Elbow 5/16" Tube OD x 1/8" NPT Thread, 10 Pack) Air Push to Connect Fittings
By MacCan USA, Inc.
In Stock
$16.99

mpn: PL5/16-N1,

4.1 out of 5 stars with 46 reviews
MacCan USA, Inc. is a professional manufacturer specialized in pneumatic fittings. Our company, founded in New York, USA, factory located in Asia. Pneumatic Fittings from MacCan, The best value in industrial automation - High quality products, Long-term stable and competitive price.Quick installation, simple and flexible, space-saving, easy to connect tube by one touch.. Even after installation, the direction of tubing can be changed freely, all tapered threads are pre-coated with Teflon with fi


Beduan Pneumatic Nickel-Plated Brass Push to Connect Air Fitting, 8mm Tube OD x 8mm Tube OD (Pack of 3), Straight Union Connector Pipe Tubing Hose Fitting for Compression
By Beduan
In Stock
$17.99

mpn: kl02710, ean: 0796826165855,

4.0 out of 5 stars with 25 reviews
Beduan Pneumatic Fittings are a compact one piece push-to-connect fitting.The Stainless steel gripping ring ensures excellent tube retention while the D sealwithin the fitting provides a positive seal on the O.D. of the tube,in both static and dynamic positions, due to an optimized design of the fitting cavity.Beduan Pneumatic composite should not be used for live swivel applicationsBody and collar are made of Brass, gripping ring is stainless steel, and D seal and O-rings are Nitrile.Size: 5/16


Metalwork Plastic Push In To Connect Tubing Quick Cap Plug Fitting, 1/4" Tube OD (Pack of 20)
By Metalwork
In Stock
$15.99

ean: 7453965858156,

4.4 out of 5 stars with 55 reviews
Material: Body: Nickel Plated Brass,POB, PBT O-ring: NBR Claw: stainless steelFluid medium: Compressed air, vacuum;. Working Pressure: 0-990Kpa;. Operation Temperature: 0-70℃;. Suitable for PU, PA, PE Hose;. Negative pressure: -100 Kpa;.


Metalwork Plastic Push To Connect Fittings Pneumatic Fittings Kit 2 Spliters+4 elbows+4 tee+4 Straight Union Ultimate Professional Set 14 Pack (3/8" OD)
By Metalwork
In Stock
$16.99

ean: 7453965867400,

4.5 out of 5 stars with 17 reviews
Working Temperature:0-60°C | 32~140°F Negative Pressure:-100Kpa | -29.5 In HgType:air hose fittings/push fit/Push to connect Tee+elbow+y spliter+Straight. Fluid Admitted:Air Vacuum Water liquifit push to connect fitting kits quick connect t fitting water setup irrigation lines(no freezing). Working Pressure:0-1.0MPa | 0-150psi. Applicable Tube:PU / PA / PE / PVC. Seal O-ring:NBR/ Lock Claw:Stainless Steel(SUS)/Body:Plastic(PET).


John Guest Acetal Copolymer Tube Fitting, Straight Adaptor, 1/4" Tube OD x 3/8" NPTF Male (Pack of 10)
By John Guest
In Stock
$22.50
$19.67
You Save: 13%

mpn: PI010823S, ean: 6656260459290,

4.0 out of 5 stars with 35 reviews
This John Guest straight adapter fitting is made of acetal copolymer and has tube and NPTF male connectors. This straight adapter fitting is for connecting pipes or fittings with different end types, diameters, or materials in a straight line. It is a push-to-connect fitting that connects to pipes or tubing on one end and has a National Pipe Taper Fuel (NPTF) male connector on the other. The fitting is made of acetal copolymer plastic, which has low moisture absorption, high tensile and flexural


Wanm Pneumatic Push to Connect Tube Fittings, Male Elbow - 3/8" Tube OD x 1/2" NPT Thread (10 per Pack)
By Wanm Pneumatic
In Stock
$36.86

mpn: PL3/8-N4, ean: 0020064338406,

4.1 out of 5 stars with 7 reviews
Wanm Pneumatic Push to Connect Tube Fittings are mainly used for quick connector piping, which can achieve line connected or disconnected with wrench easily. You can easily change the tubing connector direction. Narrow space is also suitable with the push.Push to Connect Fittings are widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical. Good Sealing All thread are Teflon Coated. Please use straight cut tubing before inserting in


Avanty 304 Stainless Steel Push to Connect Fitting, Bulkhead Union, 8mm Tube OD x 8mm Tube OD (Pack of 5)
By Avanty
In Stock
$49.99

mpn: 304PM,

4.1 out of 5 stars with 29 reviews
Suitable for PU, PV, PVC, nylon, telfon, polyurethane tube.Seal O-ring:Fluorine rubber. Working Temperature:-30℃-250℃/-22℉-480℉. Working Pressure: 0.1MPA-4MPA. Made of 304 Stainless Steel for resisting corrosion.. Easy to install and reliable sealing..


Janatics WP430532532-25 Push to Connect Tube Fitting, Union Tee, Outer Diameter of The Tube 5/32" (25 Nos per Pack)
By Janatics Pneumatic
In Stock
$41.12

mpn: WP430532532-25,

4.5 out of 5 stars with 45 reviews
Union tee Dia5/32'', Our Union Tee Suitable for both Nylon and PU tubing and, It has quick push in connection/easy removal of tube by pressing of collect cap and bubble tight sealing of tubesCompact size. Attractive design. Bubble tight sealing of tubes. New design Stainless steel collet. Maintenance free and long life.


John Guest PI451214CS Female Connector, 3/8" OD x 1/2" BSPP (Pack of 10)
By John Guest
In Stock
$49.99

mpn: PI451214CS, ean: 0665626055669,

4.8 out of 5 stars with 31 reviews
Pushfit female fitting threads onto BSPP male to provide permanent or removable leak free connection.Quick connect/disconnect. Lead free. BSPP metric threads. Use on poly or copper tube. Corrosion free.


John Guest Acetal Copolymer Tube Fitting, Bulkhead Union, 3/8" Tube OD (Pack of 10)
By John Guest
In Stock
$55.40
$48.95
You Save: 12%

mpn: PI1212S, ean: 0665626051562,

4.7 out of 5 stars with 37 reviews
This John Guest bulkhead union fitting is made of acetal copolymer and has tube connectors. This reducing branch tee fitting connects three pipes with different diameters in a main/brain configuration to reduce the flow of the piping system. It is a push-to-connect fitting that accepts the insertion of nylon, soft nylon and polyurethane tube fittings. The fitting is made of acetal copolymer plastic, which has low moisture absorption, high tensile and flexural strength, and is hard and fatigue re


3/4" Ball Valve 22185-0000LF with Disconnect Clip - Lead Free Brass Fitting for Copper, PEX, CPVC, HDPE and PE-RT Residential or Commercial Plumbing, 100% Satisfaction Guarantee (2 Pack)
By TigerBite
In Stock
$33.00

mpn: SHARKBITE752BVD,

4.8 out of 5 stars with 54 reviews
INCLUDES: (2) 3/4'' Push-Fit Ball Valves, (1) 3/4'' Disconnect Clip, (1) Push-Fit Installation Tips.. Integral tube liner for PEX installations which means no loose connections. Made of Lead Free DZR (dezincification resistant) brass which provides a strong, durable fitting that is corrosion resistant. More than 130 different fittings in a variety of sizes, all with Sharkbite grip technology and no soldering, crimps, clamps, unions, or glue, is the push-fit connection system that's really taking


EDGE INDUSTRIAL 1/2" Hose ID to 1/2" Male NPT MNPT Straight Brass Fitting Fuel / AIR / Water / Oil / Gas / WOG (Qty 10)
By EDGE INDUSTRIAL
In Stock
$30.95

mpn: E.I. BARB 17, ean: 0691023900325,

4.4 out of 5 stars with 52 reviews
1/2'' Hose ID x 1/2'' Male NPT Brass Barb Fitting. 150 PSI maximum working pressure. -40° to 160° temperature rating. Not deemed lead free. Not for use with potable water. Please Note: NPT Thread size is NOT determined by its outside thread diameter in inches. Please review our attached NPT sizing chart to cross reference NPT thread size to linear inches10 Pack of 1/2'' Hose ID x 1/2'' Male NPT Brass Barb Fittings. 150 PSI maximum working pressure, -40° to 160° Temperature Rating. PLEASE NOT



Viewing Page 9 of 10

View more products in Tube Fittings.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - massfiscalexposed.org. All Rights Reserved.