Quick Connect Hose Fittings - Page 9 - Blowout Sale! Save up to 66%


Blowout Sale! Up to 66% off on Quick Connect Hose Fittings at Mass Fiscal Exposed, Page 9. Top brands include Koolance, Dixon, Industrial Grade, Hansen, American Extractors, Snap-Tite, XHT, Dixon Valve & Coupling, Colder, Coilhose Pneumatics, Parker, Norgren, Prevost, & Summit Hydraulics. Hurry! Limited time offers. Offers valid only while supplies last.



Koolance QD2-FS06-P QD2 Female Quick Disconnect No-Spill Coupling, Panel Barb for 06mm (1/4in)
By Koolance
In Stock
$13.74

mpn: QD2-FS06-P, ean: 0829596909043,

4.3 out of 5 stars with 57 reviews
Koolance patented quick disconnect no-spill coupling with automatic shutoff. 6mm (1/4in) ID female panel-mountable hose barb with clamp for 10mm (3/8in) OD. It will only fit a Koolance QD2 male quick disconnect. After pulling the ring on the female QDC side, the quick-disconnect fittings will separate. Liquid on both sides will be automatically obstructed with approximately 0.2ml freed. Coolant volume lost upon disconnection will rise with internal pressure higher than 0.5kgf/cm2 (7psi). Additi


Dixon DCB9 Brass Air Chief Industrial Interchange Quick-Connect Air Hose Fitting, 1/2" Coupling x 1/2" NPT Male
By Dixon
In Stock
$25.18
$23.99
You Save: 5%

mpn: DCB9,

4.0 out of 5 stars with 34 reviews
This Dixon DCB series brass Air Chief industrial interchange quick-connect automatic air hose coupler has a male NPT threaded end, and connects a hose to an Air Chief industrial interchange quick connect plug. The male National Pipe Thread Taper (NPT) threaded end connects to female NPT-threaded connections. Brass is corrosion resistant, ductile at high temperatures, and has a low magnetic permeability. This fitting's maximum working pressure (MWP) is 300 pounds per square inch (psi) (20.41 bar)


Industrial Grade 2A734 Ferrule, 3/8 In, Pk10
By Industrial Grade
In Stock
$12.16
$6.47
You Save: 47%

mpn: 2A734,

4.9 out of 5 stars with 33 reviews
Hose Ferrule, Barb Size 3/8'', Inside Dia. 0.725'', Hole Dia. 0.500'', Length 0.965'', Material BrassWARNING: California ResidentsThis product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov..


Eaton Hansen B10T41 Brass Straight Through Ball Lock Hydraulic Fitting, Plug, 1-1/4"-11-1/2 NPTF Female, 1-1/4"Port Size, 1-1/4"Body
By Hansen
In Stock
$54.34
$20.99
You Save: 61%

mpn: B10T41,

4.6 out of 5 stars with 17 reviews
Eaton Hansen ST-series is a straight through coupling that is designed for use where minimum pressure drop is required and valving is not needed. These couplings are suited for various and versatile fluid transfer type systems. Ball latching mechanism. Smooth bore permits free flow of liquid or gas. Available in NPTF stem end connections. Standard body material: brass. Standard seal material: Buna-N. Applications: fluid transfer; chemical; food and beverage; injection molding; marine; medical; p


1/4" Quick Disconnect Set Stainless Steel M/F Coupler
By American Extractors
In Stock
$25.95
$24.24
You Save: 7%

mpn: 4316520555, ean: 0054933000033,

4.7 out of 5 stars with 30 reviews
Go stainless and go drip-free! Replace your brass QD's with these and forget about them.Durable and reliable stainless steel. 4000 psi / 400° f. Cold forged body resists fracture is extremely durable. Double Viton o-rings. 1/4'' fits standard carpet extractor fittings.


Snap-Tite SVHC8-8F Stainless Steel 316 H-Shape Quick-Disconnect Hose Coupling, Sleeve-Lock Socket, 1/2" NPSF Female x 1/2" Coupling Size
By Snap-Tite
In Stock
$173.99

mpn: SVHC8-8F,

4.6 out of 5 stars with 46 reviews
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing


XHT 3 USA Made Blades Dixon 539113425 575296401 Dixon RAM 48ZTR 95087 350458
By XHT
In Stock
$35.95

ean: 7426983589609,

4.9 out of 5 stars with 53 reviews
REPLACEMENT XHT BLADES Extreme Hardness Toughness Replacement XHT Lawnmower blade. XHT(Xtreme Hardness & Toughness) blades are 25-40% harder than standard lawnmower blades. Benefits of the HXT blade are sharper and longer lasting cutting edges. More resistance to bending. Tighter tolerances in the aftermarket vs. OEM. XHT blades also offer greater impact toughness. By the way they are made in the USA! Hands down the ABSOLUTE best aftermarket replacement blade on the market! Don't waste your mone


Dixon E8S8-B Brass Hydraulic Quick-Connect Fitting, Standard Plug, 1" Straight Coupling x 1" Hose ID Barbed
By Dixon Valve & Coupling
In Stock
$29.12
$25.99
You Save: 11%

mpn: E8S8-B, ean: 0697464021018,

4.0 out of 5 stars with 11 reviews
This Dixon E series brass hydraulic quick connect plug has a 1'' ID barbed hose end, valveless construction, and connects to a hydraulic quick connect coupler. The barbed hose ID connection fits inside the hose and has a greater hold than non-barbed connections. Brass provides corrosion resistance, ductility at high temperatures, and low magnetic permeability, This plug's maximum working pressure (MWP) is 1,700 pounds per square inch (psi) (115.65 bar) at 70 degrees F, and the valveless construc


CPC (Colder) HFCD101212 High-Flow Quick-Disconnect, Valved PP Body, 3/4" NPT(M)
By Colder
In Stock
$27.69
$18.20
You Save: 34%

mpn: AO-31303-02,

4.2 out of 5 stars with 19 reviews
A complete quick-disconnect fitting consists of a body and an insert (order fitting halves separately). Plus insert into coupling body to connect -- fitting halves lock into place immediately. To disconnect fitting halves, simply press the button on the coupling body. Valves models have a spring-operated 316 SS valve that seals the flow path when fitting halves are disengaged. All fitting bodies have 316 SS latch springs and EPDM seals.Manufactured by Cole-Parmer. Country of origin - United Stat


Coilhose 3/8 Integral Filter/Regulator w/Metal Bowl (26FC3-M)
By Coilhose Pneumatics
In Stock
$65.47

mpn: 26FC3-M, ean: 0029292492829,

4.5 out of 5 stars with 40 reviews
Coilhose Pneumatics 26FC3-M 26 Series 3/8'' Integral F/R, Metal Bowl.


Parker 213P-12-pk5 Pipe Fitting, Pipe, Brass, Female Pipe Cap, 3/4" (Pack of 5)
By Parker
In Stock
$66.42
$52.14
You Save: 21%

mpn: 213P-12-pk5,

4.4 out of 5 stars with 23 reviews
Parker forged and extruded Brass pipe fittings meet functional requirements of SAE J530 and SAE J531. Manufactured by Parker, made in United States.All brass construction. Meets functional requirements of sae J530 and sae J531. Threads made to dry seal standards. Both forging and extrusions available.


1/2" Norgren Series 1 Regulator
By Norgren
In Stock
$94.71

mpn: R74G-4R, ean: 0697464107620,

4.8 out of 5 stars with 28 reviews
1/2'' Norgren Series 1 Regulator w/ out gauge. 5-150 PSI range. Inlet pressure: 300 PSI at ambient temperature of 70 degrees Fahrenheit. In-line or modular installation. Relieving type. Two full flow 1/4'' NPT gauge ports without gauge.5-150 PSI range. Inlet pressure: 300 PSI. In-line or modular installation. Relieving type.


Snap-Tite SVHN8-8F Stainless Steel 316 H-Shape Quick-Disconnect Hose Coupling, Nipple, 1/2" NPSF Female x 1/2" Coupling Size
By Snap-Tite
In Stock
$135.99
$129.47
You Save: 5%

mpn: SVHN8-8F,

4.1 out of 5 stars with 52 reviews
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing


Parker 371PTC-4-6-pk5 Air Brake D.O.T. Composite Push-to-Connect Fitting, PTC, Tube to Pipe, Push-to-Connect and Male Pipe Run Tee, 1/4", 3/8" (Pack of 5)
By Parker
In Stock
$93.76
$31.69
You Save: 66%

mpn: 371PTC-4-6-pk5,

4.5 out of 5 stars with 19 reviews
Being the world's leader in leak free technologies Parker PTC fitting is a composite push-to-connect air brake fitting that meets SAE and D.O.T. Specifications. Engineered to meet the demands of all truck/trailer, mobile and rail systems worldwide Parker PTC fittings reduce assembly time versus compression style fittings by 90 percent. The composite body is strong, lightweight and impact resistance. The innovative collet design ensures positive grip on the tubing and the rigid stainless steel tu


Eaton Hansen 2HIG15 Stainless Steel Ball Lock Hydraulic Fitting, Socket, 1/4"-18 NPTF Male, 1/4" Body
By Hansen
In Stock
$34.85
$34.00
You Save: 2%

mpn: 2HIG15,

4.2 out of 5 stars with 32 reviews
Eaton Hansen 2HKIG-series stainless steel couplings can be used with various liquids and gases. They are functionally identical, but do not interchange. They can be used where it is necessary to avoid crossing lines. Proprietary interchange with all stainless steel construction. Female/socket halves available with 90 degree connections. Standard seal material: Buna-N. Applications: chemical, food and beverage, military and aerospace. 0.81-inches hex size. Measures 1-1/16-inches diameter by 2-5/1


Eaton Hansen 3000SL Brass ISO-B Interchange Pin Lock Pneumatic Fitting, Sleeve Lock Socket with Valve, 1/4"-18 NPTF Female, 1/4" Port Size, 1/4" Body
By Hansen
In Stock
$23.32

mpn: 3000SL,

4.6 out of 5 stars with 46 reviews
Eaton Hansen 3000-series industrial interchange pin lock pneumatic quick disconnect couplings are designed for compressed air, gases, and liquids. This series sets the industry standard for pin lock style pneumatic couplings. Easy, automatic, push-to-connect design provides instantaneous connection and disconnection of lines, plus automatic shut-off of socket/female end of line. All sizes accept US industrial Interchange. Meet ISO 6150 Series-B standard. Standard body material: brass. Standard s


(1) Prevost, 1/4", Industrial, IRC Regular Coupler/Compressed Air Fitting and (2) 1/4" Male Threaded Plugs COMBO
By Prevost
In Stock
$22.50

mpn: IRC061201_IRP066251, ean: 0688943696933,

4.6 out of 5 stars with 13 reviews
Prevost IRC 061201 - The Prevost IRC, push button couplers are designed for ease of use, reliability, durability and safety. The composite nylon body and nitrided steel components are engineered to withstand significant impact. The push button design makes for effortless coupling. The two stage connect/disconnect vents ''downstream'' air before disconnection eliminating ''hose-whip''. Prevost IRP 066251- Prevost's plugs are machined to very tight tolerances and exposed to a chemical hardening pr


Kubota 7J417-66220 7J417-66320 Replacement Hydraulic Quick Coupler Set, 3/8" NPT
By Summit Hydraulics
In Stock
$24.50

mpn: 7J417-66220 7J417-66320, ean: 0765552696254,

4.0 out of 5 stars with 56 reviews
Direct replacement for Kubota 7J417-66220 (Male) and 7J417-66320 (Female) Hydraulic Quick Couplers Thread: 3/8” NPT Includes both Male and Female Coupler Fits the following Kubota Models: B26 BH75A BH76 BH77 BT1000 (BACKHOE L39) BT1000A (BACKHOE W/O BUCKET L45) BT1000AV (BACKHOE W/ REMOTE VALVE KIT L45) BT1000B BT1000BV BT1200 / BT1200V (BACKHOE W/ OR W/O AUX HYD VALVE FOR M59TLB) BT1400 BT1400V BT820 (BACKHOE) LA1002-57C (FRONT LOADER) LA1002-57R / 5R1 / 5R2 (FRONT LOADER) LA1002-68C (FRONT L


Parker 661FHD-6-4-pk5 45 Degree Fitting, Male Flare to Female Flare, Brass, Flare Connector, 3/8", 1/4" (Pack of 5)
By Parker
In Stock
$62.46
$47.52
You Save: 24%

mpn: 661FHD-6-4-pk5,

4.5 out of 5 stars with 14 reviews
All Brass 45 degree flare fitting that resists mechanical pullout. Meets functional requirements of SAE J512 and J513. Manufactured by Parker, made in United States.All brass construction. Forged nuts for refrigeration applications. Long nuts for vibration. U.L. listed for flammable liquids. Functional requirements of sae J512 and sae J513.



Viewing Page 9 of 9

View more products in Hose Fittings.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - massfiscalexposed.org. All Rights Reserved.