Solenoid Valves - Page 6 - Huge Savings! Save up to 12%
Huge Savings! Up to 12% off on Solenoid Valves at Mass Fiscal Exposed, Page 6. Top brands include Asco, ARO, Honda, Hydraforce, ASCO Numatics, MOTTROL, Baomain, DELTROL, U.S. Solid, JEM&JULES, & Ranco. Hurry! Limited time offers. Offers valid only while supplies last.
ASCO 8040H007-120/60,110/50 Aluminum Body Direct Acting Fuel Gas Shutoff Valve, 1/4" Pipe Size, 2-Way Normally Closed, Nitrile Butylene Sealing, 5/16" Orifice, 1.1 Cv Flow, 120V/60 Hz, 110V/50 Hz
4.8 out of 5 stars with 45 reviews
Combustion valves are for the control of combustible gases and fuel oil.2-way normally closed operation. 1/4'' pipe size. Nitrile Butylene Sealing.
ARO 1/8" 12VDC 3-Way, 2-Position Solenoid Air Control Valve - P251SS-012-D
4.9 out of 5 stars with 47 reviews
Description : Solenoid Air Control Valve, Air Valve Type 3-Way, 2-Position, Actuator/Return Solenoid/Spring, Body Style Body Ported, Pipe Size 1/8'', Voltage 12VDC, CFM 6.9, Coefficient of Volume 0.144, Electrical Connections Lead Wire, Shifting Technology Direct, Power Consumption 4.5W, Pressure Range 0 to 120 psi, Ambient Temp. Range 32 Degrees to 125 Degrees F, Override Non-Locking Manual, Overall Height 2-1/2'', Overall Length 1-1/4'', Overall Width 1'', NEMA Classification NEMA
ASCO 8320G136-120/60,110/50 Brass Body Direct Acting General Service Solenoid Valve, 1/8" Pipe Size, 3-Way Normally Open, Nitrile Butylene Sealing, 3/64" Orifice, 0.06 Cv Flow, 120V/60 Hz, 110V/50 Hz
4.7 out of 5 stars with 55 reviews
These valves have three pipe connections and two orifices. When one orifice is open, the other is closed and vice versa. They are commonly used to alternately apply pressure to an exhaust pressure from a valve actuator or a single acting cylinder. These valves can be normally closed, normally open or universal.Normally closed (pressure to cylinder port when energized) operation. Nitrile Butylene Sealing. 1/8'' Pipe Size. Mountable in any position. Broadest range of applications.
HydraForce SV08-47DM-0-N-00 Directional Valve, 4-Way, 3-Position, Motor Spool, Manual Override
mpn: SV08-47DM-0-N-00, ean: 0765552695165,
4.8 out of 5 stars with 55 reviews
SKU: SV08-47DM-0-N-00 Hydraforce Part Number: SV08-47DM-0-N-00 Directional Valve, 4-Way, 3-Position, Motor Spool Fits VC08-4 Cavity Uses Size 08 (1/2″ Hole) Solenoids Solenoid-operated, 4-way, 3-position, direct-acting, spool-type, motor spool, screw-inhydraulic cartridge valve with manual override When de-energized, the SV08-47DM blocks flow to 3, while allowing flow from 2 to 1,and from 4 to 1. When coil #1 is energized, flow is allowed from 3 to 4, and from2 to 1. When coil #2 is
Asco SC8256A2V Solenoid Valve Assembly
You Save: 12%
4.7 out of 5 stars with 10 reviews
PN: SC8256A2V (2) 1/8'' Npt's Watts: 6.9 Air (Psi): 220 LT. Oil(Psi): 220 Water (Psi): 220 400125-142 24Vdc 6,9w Ft.
Hydraforce SV08-40-0-N-00 Spool Valve, 4-Way, 3 GPM
mpn: SV08-40-0-N-00, ean: 0765552694120,
4.4 out of 5 stars with 36 reviews
Hydraforce Part Number: SV08-40-0-N-00 4-way, 2-position, Direct-acting When de-energized, the SV08-40 allows flow between 3 and 2, and between 4 and 1. When energized, the cartridge’s spool shifts to open flow between 3 and 4, and between 2 and 1. All ports are open at crossover. Features: 3 GPM max Flow 3000 PSI Rated Fits VC08-4 Cavity Uses Size 08 (1/2″ Hole) SolenoidsHydraforce Part Number: SV08-40-0-N-00. 4-way, 2-position, Direct-acting. 3 GPM max Flow, 3000 PSI Rated. Fits VC08-4
Hydraforce SV08-21-0-N-00 Solenoid Poppet Cartridge Valve, 2-Way, Normally Open
mpn: SV08-21-0-N-00, ean: 0765552694007,
4.7 out of 5 stars with 21 reviews
Hydraforce Part Number: SV08-21-0-N-00 A solenoid-operated, 2-way, piloted, poppet-type, normally open, screw-in, hydraulic cartridge valve designed for low leakage in load-holding applications. When de-energized, the SV08-21 allows flow from 2 to 1, while flow from 1 to 2 is severely restricted. When energized, the valve closes, blocking flow from 2 to 1. In this mode, flow from 1 to 2 will be allowed after overcoming the solenoid force. This requires 3.4 to 10.3 bar (50 to 150 psi).
ASCO Numatics L01SA4592000030 L01 Single Direct Solenoid, 1/8" Inline, Spring Return, 2 Position, 4-Way (5/2), Din Plug-in, NPTF, 110 VAC - 120 VAC, 50 Hz - 50 Hz
4.4 out of 5 stars with 39 reviews
Numatics LO1 Series 4-Way, 4-ported offers high flow in a compact, direct acting solenoid valve. Each LO1 design which can be mounted either inline or on a manifold in any Pos. The LO1 also offers an optional side mounted speed control.Direct Solenoid Actuated, DIN Plug-In Solenoid With Indicator Light. Unlubricated or Lubricated Service, Integral Speed Control Available. Nema 4/IP57.
SD1244-C-10 Solenoid Valve FITS Komatsu DC24V PC60-7 PC120-6 PC120-5 PC120-7 203-60-62171
mpn: MTE2455, ean: 0647567164310,
4.9 out of 5 stars with 15 reviews
SD1244-C-10 SOLENOID VALVE FITS KOMATSU DC24V PC60-7 PC120-6 PC120-5 PC120-7 203-60-62171 , AFTERMARKET REPLACEMENT EXCAVATOR PARTSDESCRIPTION:SD1244-C-10. APPLICATION MODEL: SOLENOID VALVE DC24V PC60-7. Mottrol specialized in excavator parts since 2003, offering wide range of aftermarket replacement parts used on different brands of excavators, through decade years of development, our products were successfully exported to more than 100 countries and received good reputation, we highly
Hydraforce SV10-21-0-N-00 Solenoid Poppet Cartridge Valve, 2-Way, Normally Open
mpn: SV10-21-0-N-00, ean: 0765552694069,
4.3 out of 5 stars with 43 reviews
SKU: SV10-21-0-N-00 Hydraforce Part Number: SV10-21-0-N-00 A solenoid-operated, 2-way, normally open, piloted poppet-type, screw-in hydraulic cartridge valve designed for low leakage in load-holding applications. When de-energized, the SV10-21 allows flow from 2 to 1, while flow from 1 to 2 is severely restricted. When energized, the valve closes, blocking flow from 2 to 1. In this mode, flow from 1 to 2 will be allowed after overcoming the solenoid force. This requires 3.4 to 10.3 bar (50
Hydraforce 6365115 Solenoid Valve Coil, Wire Leads, 115v AC, 10 Series
4.1 out of 5 stars with 46 reviews
Brand: HydraForce Part number: 6365115 115v AC Ohms: 568.0 Amps: 0.17 Connection: Wire Leads Hole Diameter: 5/8” Fits Valve Stem Series 10, 12, 16, 38, and 58Brand: HydraForce. Part number: 6365115. 115v AC. Hole Diameter: 5/8''. Fits Valve Stem Series 10, 12, 16, 38, and 58.
Baomain Solenoid Valve 4V210-08 AC 220V PT1/4 2 Position 5 way Base Muffler Quick Fittings Set
mpn: 4V210-08, ean: 0711811429231,
4.0 out of 5 stars with 44 reviews
solenoid valves are connected on a base, 2 position 5 way and single head design. Consisted of 5 solenoid valves and base, buit-in quick fittings and solenoid valve mufflers. It is applied widely to the pneumatic system and mechanism, such as textile industry, light industry and chemical industry, etc.Coil Voltage: AC 220V. Position & Way: 2 Position 5 Way. Port size: PT 1/4; CV value: 0.78. Quick Fitting Inner Dia.: Solenoid Valve: 6mm; Base: 8mm. Weight: 1344g.
Deltrol DSV-080-2NCP-N Solenoid Cartridge Valve, SPX Stone/Fenner VF-4009
4.6 out of 5 stars with 7 reviews
SKU: DSV-080-2NCP-N Normally-Closed, Two-Way, Two-Position, Pilot-Operated Solenoid Valve. A cartridge valve designed with positive shut off to be used in loadholding applications. When de-energized, the DSV-080-2NCP acts as a check valve,allowing flow from (1) to (2) , while blocking flow from (2) to (1).When energized, the poppet lifts to open the (2) to (1) flow path. Features: 4000 PSI (276 Bar) rating. Flow: 5 GPM Hardened poppet and plunger for long life and low leakage. Efficient
3/4" NPT Brass Electric Solenoid Valve 110V AC Normally Closed NBR from U.S. SOLID
mpn: USS2-00014, ean: 0853996003971,
4.6 out of 5 stars with 55 reviews
U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, three-quarter inch (3/4'') female threaded (NPT) connections, and NBR gasket. Suitable for use with hot or cold water, gas, air, oils, very low viscosity fluids (< 20 cst), etc. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing. Brand: U.S. Solid
1 Inch Solenoid Valve 24VAC Brass Electric Air Water Gas Diesel Normally Closed NPT High Flow
mpn: C-8, ean: 7500652700936,
4.0 out of 5 stars with 56 reviews
Brass Electric Solenoid valve in 1 Inch that can be used for a wide variety of Applications. Can be used with co2, compressed air, diesel, gas, water, light oils, and many other substances. 25mm opening allows a high flow rate for applications that requirVoltage: 24V AC Volts.. Diaphragm/Seals: NBR. Operating Type: Diaphragm Valve. Pressure Rating: Air: 110 psi / Water: 75 psi / Light Oil: 60 psi. Suitable Applications: Air, Water, Oils. CV Rating 12 Max Temp 170F. Fast valve response with 100%
1" Brass Electric Solenoid Valve 12 VDC Normally Closed Water, Diesel...
mpn: USS2-00003, ean: 0853996003322,
4.3 out of 5 stars with 55 reviews
U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, one inch (1'') female threaded (NPT) connections, and heat and oil resistant Viton gasket. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, gasoline, kerosene, or diesel fuel. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation
Baomain 1 inch DC 12V Brass Electric Solenoid Valve Water Air Fuels NC Valve
mpn: 2W-250-25, ean: 0711811392085,
4.5 out of 5 stars with 52 reviews
Operation Mode:Normally ClosedInlet/Outlet Ports:PT 1''Working Pressure:0-1.0Mpa Plunger Tip:NBR Suitable Media: Water Oil Air Installation: Fluid direction should be as the arrow showsVoltage: DC 12V Solenoid Valve. Inlet/Outlet Ports:1'' Female NPT Threads. Operation Mode: Normally Closed.. Valve Type:Direct Acting, Wet Armature. Body Material: Brass; weight: 890g.
Ranco Solenoid Coil, 24 Vac
mpn: GID-585033, ean: 0662013924577,
4.2 out of 5 stars with 25 reviews
Type IDK solenoid coils are designed for use with current production (generation 4) V0, V1, V2, V3, V6, V10 and V12 rancho heat pump reversing valves. These color-coded, encapsulated, continuous duty, moisture resistant electro-magnetic coils are designed to operate the pilot valve that controls these reversing valves. Included with the solenoid coil is a W29 wiring harness with 48Leads. - manufacturer: ranchSolenoid coil 24 vat. Ranch LDK-110000-070. Manufacturer: Franco.