Tube Fittings - Page 3 - Extreame Savings! Save up to 45%


Extreame Savings! Up to 45% off on Tube Fittings at Mass Fiscal Exposed, Page 3. Top brands include Dixon Valve & Coupling, Parker, Glacier Tanks, Parker Transair, YJINGRUI, Dixon Sanitary, John Guest, RathGibson, AB, Parker Hannifin, Avanty, Palmgren, KOLERFLO, Parker Fluid Connectors, DERNORD, & PANDUIT. Hurry! Limited time offers. Offers valid only while supplies last.



Dixon B7WWW-R400P Stainless Steel 316L Polished Fitting, Weld Short Tee, 4'' Tube OD
Dixon B7WWW-R400P Stainless Steel 316L Polished Fitting, Weld Short Tee, 4" Tube OD
By Dixon Valve & Coupling
In Stock
$101.20
$86.11
You Save: 15%

mpn: B7WWW-R400P, ean: 0697464405986,

4.5 out of 5 stars with 10 reviews
This Dixon B7WWW series polished weld short tee sanitary fitting is made of stainless steel 316L and has tube connections. This fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C. “A'' and “B'' indicate the main run on the fitting, and “C'' indicates the branch. This fitting is made of stainless steel 316L for strength,


Parker A6FF6-MG-pk20 Push-to-Connect All Plastic FDA Compliant Fitting, Trueseal, Tube to Female Flare, Acetal, Push-to-Connect and Female Flare Connector, 3/8'' (Pack of 20)
Parker A6FF6-MG-pk20 Push-to-Connect All Plastic FDA Compliant Fitting, Trueseal, Tube to Female Flare, Acetal, Push-to-Connect and Female Flare Connector, 3/8" (Pack of 20)
By Parker
In Stock
$130.51

mpn: A6FF6-MG-pk20,

4.8 out of 5 stars with 8 reviews
Parker trueseal fittings are manufactured from FDA compliant materials and are NSF-51 listed for contact with food. Gray Acetal fittings meet NSF-61 requirements for potable water. Manufactured by Parker, made in United States.Gripping teeth available in stainless steel or with and engineered thermoplastic bite edge. Acetal, polypropylene and kynar body material. Engineered O-ring increases seal compression on tube. Epdm seal in acetal and polypropylene, fluorocarbon in kynar material. Fda


Rubber Hose Adapter | Tri Clamp 1.5 inch x 1.5 in. Barb - Stainless Steel SS304 - Glacier Tanks - (10 Pack)
Rubber Hose Adapter | Tri Clamp 1.5 inch x 1.5 in. Barb - Stainless Steel SS304 - Glacier Tanks - (10 Pack)
By Glacier Tanks
In Stock
$132.60

mpn: 14MPHR-G150-150,

4.5 out of 5 stars with 42 reviews
Notice About Bundle Packs:Please understand our bundle packs share from a communal inventory. A buyout of one pack type will consume inventory of other packs. Due to limitations, our system has a delay in updating other pack stock quantities. Thank you graciously for understanding.Tri Clamp hose adapters meet a variety of needs. Several sizes and styles are available, including 90 degree bends, reducing adapters, or an extra long rigid adapter with additional barbs for higher pressure


Racking Arm | Tri Clamp 1.5 inch x 1 in. x 90 Degree x 6 in. x 14 in. - Stainless Steel SS304 - Glacier Tanks - (3 Pack)
Racking Arm | Tri Clamp 1.5 inch x 1 in. x 90 Degree x 6 in. x 14 in. - Stainless Steel SS304 - Glacier Tanks - (3 Pack)
By Glacier Tanks
In Stock
$225.36

mpn: RK90-G150-100-6-14,

4.9 out of 5 stars with 38 reviews
Notice About Bundle Packs:Please understand our bundle packs share from a communal inventory. A buyout of one pack type will consume inventory of other packs. Due to limitations, our system has a delay in updating other pack stock quantities. Thank you graciously for understanding.Rotating Racking ArmsRotating racking arms are an integral part of any fermentation system involving conical fermenters or brite tanks. Typically found in the bottom cone of a cylindroconical fermentation tank, the


Parker 6698 02 01 Transair 40mm (1 1/2'' ID), 50mm (2'' ID) & 63mm (2 1/2'' ID) Drill Bit
Parker 6698 02 01 Transair 40mm (1 1/2" ID), 50mm (2" ID) & 63mm (2 1/2" ID) Drill Bit
By Parker Transair
In Stock
$197.64

mpn: 6698 02 01,

4.9 out of 5 stars with 39 reviews
Parker Transair 6698 series drilling tool with cutting dia of 7/8'' is for use with 1-1/2 - 2-1/2'' transair aluminum pipe.


Single line 4-Ports PTFE Valves Vacuum Gas Distributor Glass Manifold 4mm
Single line 4-Ports PTFE Valves Vacuum Gas Distributor Glass Manifold 4mm
By YJINGRUI
In Stock
$131.00

mpn: WDQY302, ean: 6019168569582,

4.4 out of 5 stars with 7 reviews
Single- line vacuum gas distributor 2mm Glass Manifold for use with light vacuum or Inert Gas The outer diameter of the main tube is 22mm. The outer diameter of the right port is 10mm The outer diameter of port under the F4 valve is 8mm or 10mm optional ,please kindly let us know which size you need. The distance between each two valve is 10mm The shipment will be arranged in 1-3 working days( not including customized product), and takes about another 3-9 working days to reach you.The outer


End Cap Reducer | Tri Clamp 8 inch x 3 in. - Stainless Steel SS304 - Glacier Tanks - (2 Pack)
End Cap Reducer | Tri Clamp 8 inch x 3 in. - Stainless Steel SS304 - Glacier Tanks - (2 Pack)
By Glacier Tanks
In Stock
$157.84

mpn: B3155MP-G800-300,

4.3 out of 5 stars with 37 reviews
Notice About Bundle Packs:Please understand our bundle packs share from a communal inventory. A buyout of one pack type will consume inventory of other packs. Due to limitations, our system has a delay in updating other pack stock quantities. Thank you graciously for understanding.Tri Clamp end cap reducers are an alternative to concentric reducers when space is at a premium in confined areas. While they are called reducers, they are often used as an increaser flowing from smaller to larger


Dixon Sanitary BPE CxCxC Instrument Tee, 316L Stainless Steel, 15Ra EPID, 32Ra MPOD - 3/4'' x 1-1/2'' PM Finish (SFT4)
Dixon Sanitary BPE CxCxC Instrument Tee, 316L Stainless Steel, 15Ra EPID, 32Ra MPOD - 3/4" x 1-1/2" PM Finish (SFT4)
By Dixon Sanitary
In Stock
$150.65

mpn: T7IMPS-075150PM,

4.4 out of 5 stars with 21 reviews
Dixon Sanitary T7IMPS BPE Instrument Clamp Tees are manufactured according to the latest ASME BPE specification. These CxCxC Dixon Bio-Pharm Fittings are constructed of 316L Stainless Steel and finished with either a PL or PM finish. The PL finish is the equivalent of a SFT1 finish (20 µin Ra MPID / 32 µin Ra MPOD) and the PM finish is the equivalent of a SFT4 finish (15 µin Ra EPID / 32 µin Ra MPOD).High Purity Bio-Pharm fittings are commonly used in pharmaceutical, bioprocessing,


John Guest Straight Union, 3/8'' OD, Acetal, 10/Pk
John Guest Straight Union, 3/8" OD, Acetal, 10/Pk
By John Guest
In Stock
$57.97
$31.95
You Save: 45%

mpn: AO-34006-18,

4.4 out of 5 stars with 48 reviews
A single fitting offers secure connections and quick disconnection—no need to purchase two fitting halves. Simply push tubing past the O-Ring to the internal tube stop—steel teeth on the collet grip tubing for leak-proof connections. To Disconnect, press collet against fitting body to disengage steel teeth— tubing slides right out. Fittings work with semi rigid plastic (polypropylene, polyethylene, nylon) and soft metal (Brass, copper, mild steel) tubing. To connect flexible tubing such


1-1/2'' OD 3A Polished Stainless Steel Tubing, 316L, Welded, 16 Gauge (.065'') - 6' Length
1-1/2" OD 3A Polished Stainless Steel Tubing, 316L, Welded, 16 Gauge (.065") - 6' Length
By RathGibson
In Stock
$48.82

mpn: T-0150-W-A270S2-065-6-3A-K6,

4.2 out of 5 stars with 53 reviews
6' length of 1-1/2'' OD 3A Polished Stainless Steel Welded Tubing with a 16 gauge (0.065'') wall. This polished tubing undergoes multiple passes through the polishing heads to remove any unwanted residue, resulting in a mechanically polished 20Ra Max inner diameter (ID) and 32Ra Max outer diameter (OD). The resulting product meets or exceeds both ASTM A270-S2 and 3A specifications.This tubing undergoes a rigorous quality inspection, including destructive and non-destructive examination, at the


AB Brass Barbed Tee 1 in. x 1 in. x 1 in, PEX Crimp Tee''T'' Fitting (25-Pack), Lead Free
AB Brass Barbed Tee 1 in. x 1 in. x 1 in, PEX Crimp Tee"T" Fitting (25-Pack), Lead Free
By AB
In Stock
$57.96

mpn: AB62108,

4.9 out of 5 stars with 43 reviews
ALFA PEX Tees Connect 3 PEX Tubes and Pipes; Solid Leak-Proof Connections is an easy to install, low cost solution to connect PEX Tubing and compatible for potable water distribution and hydronic heating applications. This brass Barbed Tee is made of lead-free performance Brass construction. This plumbing tool is used to connect PEX tubing and piping together. Compatible with all major brands of PEX tubing. It features a unique fitting system for strong, durable connections without the need for


Parker Hannifin A6MC6-MG-pk20 TrueSeal Male Connector Fitting with EPDM Seal, Acetyl, 3/8" Push-to-Connect Tube x 3/8" Male NPTF, Gray, Acetyl (Pack of 20)
By Parker Hannifin
In Stock
$63.67
$51.84
You Save: 19%

mpn: A6MC6-MG-pk20,

4.1 out of 5 stars with 33 reviews
The product is true seal male connector fitting with EPDM seal, Acetyl, 3/8 inch push-to-connect tube x 3/8 inch male NPTF, Gray. It features gripping teeth available in stainless steel or with and engineered thermoplastic Bite edge, engineered O-Ring increases seal compression on tube, FDA compliant, all fittings are NSF-51 listed, push button release.Gripping teeth available in stainless steel or with and engineered thermoplastic bite edge. Engineered O-ring increases seal compression on


Dixon 14VB-R300 Stainless Steel 316L Sanitary Fitting, Unpolished Stub End, 3'' Tube OD
Dixon 14VB-R300 Stainless Steel 316L Sanitary Fitting, Unpolished Stub End, 3" Tube OD
By Dixon Valve & Coupling
In Stock
$92.67

mpn: 14VB-R300, ean: 0089109761524,

4.8 out of 5 stars with 12 reviews
This Dixon 14VB-R series unpolished stub end sanitary fitting is made of stainless steel 316L and connects to a flange. A stub end fitting is seated against the flange to create a seal through pressure. It is made of stainless steel 316L for strength, enhanced resistance to corrosion, and greater ease in welding than stainless steel 304. The lower carbon content of the material minimizes harmful carbide precipitation due to welding. This fitting has a maximum operating pressure rating of 250


Avanty Nickel Plated Brass Push to Connect Tube Fitting, 90 Degree Male Elbow, 8mm OD x 1/2'' NPT Male (Pack of 20)
Avanty Nickel Plated Brass Push to Connect Tube Fitting, 90 Degree Male Elbow, 8mm OD x 1/2" NPT Male (Pack of 20)
By Avanty
In Stock
$59.99

mpn: PL,

4.7 out of 5 stars with 35 reviews
This 90-degree male elbow, or ''ell,'' is a PBT and nickel-plated brass push-to-connect fitting that connects a tube to a female threaded connection at a 90-degree angle. It has a push-to-connect tube connection on one end and pre-coated male National Pipe Taper (NPT) threads on the other end for connecting to male threaded pipes. The NPT threads create a tighter seal than straight threads. This fitting is made of PBT and nickel-plated brass for strength and flexibility, abrasion resistance,


Butt/Fillet Weld Gauge, From 0 to 3/4 In
Butt/Fillet Weld Gauge, From 0 to 3/4 In
By Palmgren
In Stock
$55.44
$53.54
You Save: 3%

mpn: 55501, ean: 0696504833376,

4.1 out of 5 stars with 47 reviews
' Butt and Fillet Weld Gauge, Measures Fillet Size Range from 0 to 3/4 In, Maxium Convexity 0 to 3/4 In and Butt Weld Size 1/32 In to 1/8 In, Stainless Steel with Laser Etched Markings, Threaded Pin, and Finger Knob for Easy Locking of Center Slide, Accurately Checks and Measures Butt and Fillet Welds, Includes 5/16 In and 1/8 In Root Open Measurement Guide 'Price For: Each Includes: 5/16'' and 1/8'' Root Open Measurement Guide Item: Butt and Fillet Weld Gauge Characteristics: Measures Fillet


2'' Sanitary Sight Glass Stainless Steel 304 in-Line Sight Glass with Clamp End, Flow Sanitary Straight Sight Glass Tri-clamp (Flow Pipe OD 51mm)
2" Sanitary Sight Glass Stainless Steel 304 in-Line Sight Glass with Clamp End, Flow Sanitary Straight Sight Glass Tri-clamp (Flow Pipe OD 51mm)
By KOLERFLO
In Stock
$47.99

mpn: 0020190227, ean: 0681013755851,

4.1 out of 5 stars with 46 reviews
ApplicationsThis KOLERFLO Sanitary In-line Sight Glasses are used widely in the food, dairy and beverage sanitary processes to view products and fluids. Sanitary Straight Sight Glasses are constructed with SUS304 housing, Tempered Glass and silicone seals. These In-line Sight Glasses are easier to clean. Moreover, with easily replaceable seals and glass these KOLERFLO Sight Glasses will service you for years. Product FeaturesMax Pressure: 120 PSI Max Temperature: 300 FahrenheitTri-clamp size:


Parker W172PLP-4-2 Prestolok Male Branch Tee Sw 1/4T X 1/8 NPT
Parker W172PLP-4-2 Prestolok Male Branch Tee Sw 1/4T X 1/8 NPT
By Parker Fluid Connectors
In Stock
$76.35

mpn: W172PLP-4-2,

4.4 out of 5 stars with 40 reviews
Prestolok Nickel-Plated Brass Push-To-Connect Fittings Max. operating pressure: 300 psi Max. operating temp.: 0° to 200°F (depending on tubing used) Pkg. qty.: 10 Designed for low-pressure circuits where fast assembly, disassembly, and reassembly are important. Compact, 1-pc., nickel-plated brass fittings are for use with polyethylene, nylon, or polyurethane tubing. Support ferrules or I.D. tube supports only required for thin-walled poly tubing. Vacuum applications depend on temperature and


DERNORD Sanitary Concentric Reducer Tri Clamp Clover Stainless Steel 304 Sanitary Fitting End Cap Reducer (Tri Clamp Size: 6 inch x 4 inch)
DERNORD Sanitary Concentric Reducer Tri Clamp Clover Stainless Steel 304 Sanitary Fitting End Cap Reducer (Tri Clamp Size: 6 inch x 4 inch)
By DERNORD
In Stock
$55.99

mpn: DERNORD-463, ean: 0698253849455,

4.6 out of 5 stars with 7 reviews
FEATURES This DERNORD This DERNORD series concentric reducer sanitary fitting is made of stainless steel 304 and clamps to tubing on both ends. This DERNORD reducer sanitary fitting are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes, and shapes. This DERNORD reducer sanitary fitting is made of stainless steel 304 for resistance to corrosion and high


GB4B0612TPI-1 - GROUNDING BUSBAR, TELECOMMUNICATION CONN (GB4B0612TPI-1)
GB4B0612TPI-1 - GROUNDING BUSBAR, TELECOMMUNICATION CONN (GB4B0612TPI-1)
By PANDUIT
In Stock
$416.67
4.1 out of 5 stars with 37 reviews
GB4B0612TPI-1 - GROUNDING BUSBAR, TELECOMMUNICATION CONNSpecification: Accessory Type : Grounding BusbarFor Use With : Telecommunication ConnectorsProduct Information 2: RoHS Compliant: YesRoHS CompliantDenotes whether a product is RoHS compliant and to what levelMore info on our RoHS & Legislation pagesRoHS Phthalates Compliant: To be advisedDenotes whether a product is RoHS compliant and to what levelMore info on our RoHS & Legislation pagesSVHC: No SVHC (15-Jan-2018)Denotes whether a product


Concentric Reducer | Tri Clamp 2 inch x 1.5 in. - Stainless Steel SS304 / 3A - Glacier Tanks - (2 Pack)
Concentric Reducer | Tri Clamp 2 inch x 1.5 in. - Stainless Steel SS304 / 3A - Glacier Tanks - (2 Pack)
By Glacier Tanks
In Stock
$47.98

mpn: B3114MP-G200-150,

4.1 out of 5 stars with 38 reviews
Notice About Bundle Packs:Please understand our bundle packs share from a communal inventory. A buyout of one pack type will consume inventory of other packs. Due to limitations, our system has a delay in updating other pack stock quantities. Thank you graciously for understanding.Tri Clamp concentric reducers decrease in diameter towards the center thus forming a conical cylinder. A concentric reducer is often used inline on a vertical flow application, or if laid horizontally, as an



Viewing Page 3 of 4

View more products in Fittings.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - massfiscalexposed.org. All Rights Reserved.