Valves - Extreame Savings! Save up to 41%


Extreame Savings! Up to 41% off on Valves at Mass Fiscal Exposed. Top brands include Watts, Frymaster, SharkBite, U.S. Solid, Raptor Blast, BASO Gas Products LLC, Alemite, Jamesbury Valves, Actuators and Repair Parts, HSH-Flo, Zurn, Everflow Supplies, Apollo Valve, Georg Fischer, Cross Manufacturing, Symmons, A. O. Smith, MAXITROL, & Dixon. Hurry! Limited time offers. Offers valid only while supplies last.



Watts 2" Float Valve - FIP Connection
By Watts
In Stock
$82.35

mpn: 953274, ean: 0098268023657,

4.2 out of 5 stars with 11 reviews
Highlights: Size: 2'' Standard duty Non-Threaded outlet 1-1/4'' through 2'' bronze body with female NPT inlet-open outlet. Cotter pin pivot arm assembly. Replaces plungers. Maximum pressure: 125psi. Maximum temperature: 180 degrees F.Size: 2''. Standard duty. Non-Threaded outlet. 1-1/4'' through 2'' bronze body with female NPT inlet-open outlet.. Cotter pin pivot arm assembly..


Frymaster 8071603 Gas Valve 1/2" 225,000 1/4" Cct Pilot Out For Southbend Frymaster Fryer 541054
By Frymaster
In Stock
$137.00

mpn: PD14950.5, ean: 0216813479111,

4.8 out of 5 stars with 41 reviews
[gas nat ] [ size 1/2'' fpt ] [ nat safety ] [225,000 btu] [ 1/4'' cct pilot out ] [width 4-1/8'' ] [ brand honeywell ] [ mfg# vs820a1807 ], 750 millivolt does not come with thermopile. Thermopile h1265, t-225, # 51-1348 36'' w/ wire leads, 1/4'' push-on tabs. For lp valve use h1106, s-168, # 54-1074 for lp conversion use h933, # 51-1270 to convert back to nat use h934 # 51-1271 frymaster fryer models made in or after feb. 1993: gf14, gf40sd, mj35, mj235, mjcfsc,series: 35, m k e model pitco


SharkBite 22185-0000LFA 22185-0000LF Plumbing fitting, 0.75 Inch, brass
By SharkBite
In Stock
$24.99
$17.00
You Save: 32%

mpn: 22185-0000LFA, ean: 0697285012585,

4.1 out of 5 stars with 53 reviews
Cash Acme 22185-0000LF 3/4'' SharkBite Lead Free Ball Valve Cash Acme 22185-0000LF 3/4'' SharkBite Lead Free Ball Valve Features:;Ball valve;Highly forged brass;Single lever control;Push fitting;Lead free;3/4'';CA/VT CompliantINSTALLS IN SECONDS: 3/4 inch ball water valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal. PERFORMANCE: 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating Applications.. COPPER, PEX, CPVC, PE-RT: Shar


1/2" Stainless Steel Electric Solenoid Valve 12V DC Normally Closed
By U.S. Solid
In Stock
$37.99

mpn: USS2-00069, ean: 0853996003599,

4.8 out of 5 stars with 48 reviews
U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a stainless steel body, one-half inch (1/2'') female threaded (NPT) connections, and heat and oil resistant Viton gasket. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, gasoline, kerosene, or diesel fuel. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for


High Pressure Ball Valve Kit 3/8" Male Plug X 3/8" Female Quick Connect 4000PSI for High Pressure Hoses
By Raptor Blast
In Stock
$28.13
$21.00
You Save: 25%

mpn: CS-20193-DLX,

4.2 out of 5 stars with 50 reviews
Raptor Blast 3/8in. Ball Valve with Couplers for Whirl-A-Way Vortex Mosmatic MI-T-M Surface CleanerHigh-pressure ball valve has a 3/8 in. male plug and a 3/8 in. female quick connector. Easily change pressure washer accessories with quick connections.FeaturesZinc-plated ball valve kit designed for high-pressure hoses.Switch wands, tips, or hoses quickly and easily.Superior leak resistance.Valve is easy to turn and provides good leverage under high pressure.Max PSI: 4,000 PSIInlet: 3/8 in. Male


GARLAND Baso Safety Valve 3/8" NPT inlet and outlet 1415702
By BASO Gas Products LLC
In Stock
$99.99

mpn: 1415702, ean: 0222910811914,

4.0 out of 5 stars with 40 reviews
SPECIFICATIONS INLET: 3/8'' NPT OUTLET: 3/8'' NPT PILOT INLET: 3/16'' TUBING WEIGHT: .568 lb PART REFERENCE INFO BASO GAS PRODUCTS LLC: H15HR2D, H15HQ-6, H15HQ6, H15HR-2C, H15HR2C GARLAND: CK253490-2, 1415701, 1415702, 1415703 US RANGE: CK253490-2, 227071 MODEL REFERENCE INFO GARLAND MODELS: GPD48, GPD60 GARLAND RANGE/OVEN MODELS: GV280 SERIES, G280 SERIES, H280 SERIES, 40/50 SERIES US RANGE CHAR-BROILER/CONVECTION OVEN MODELS: C836-36ARC US RANGE GRIDDLE MODELS: BKA2436-1 US RANGE GRIDDLE


Alemite 6320-3 Steel Control Valve, 1/4" Female NPTF Inlet x 1/8" Female NPTF Outlet, 7500 psi
By Alemite
In Stock
$221.43
$130.97
You Save: 41%

mpn: 6320-3, ean: 0098468105825,

4.4 out of 5 stars with 28 reviews
Alemite 6320-3 Steel Control Valve, 1/4'' Female NPTF Inlet x 1/8'' Female NPTF Outlet, 7500 psi.Steel control valve for use with high-pressure power equipment to dispense lubricants. 1/4'' NPTF female inlet, 1/8'' NPTF female outlet. Single-shot lever mode for delivering 1/2 of pre-measured fluid. Continuous flow lever mode for delivering uninterrupted fluid flow. Maximum pressure 7500 psi.


3/4" Brass Electric Solenoid Valve 12VDC N.C. Air Water Fuel VITON
By U.S. Solid
In Stock
$37.99

mpn: USS2-00059, ean: 0853996003728,

4.5 out of 5 stars with 35 reviews
U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, three-quarter inch (3/4'') female threaded (NPT) connections, and heat and oil resistant Viton gasket. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, gasoline, kerosene, or diesel fuel. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigat


Jamesbury VPVL200DABD Rack and Pinion Actuator, Size 200, Aluminum
By Jamesbury Valves, Actuators and Repair Parts
In Stock
$149.99

mpn: VPVL200DABD,

4.0 out of 5 stars with 18 reviews
Jamesbury Valv-Powr VPVL series size 200 double acting rack and pinion actuator having 2.95'' bore dia features a pressure rating of 30 - 116 psi and is made of aluminum Brand Name|Jamesbury#MFR Part Number|VPVL200DABD#UNSPSC|31251505#Item|Rack and Pinion Actuator#Type|Pneumatic, Double Acting#Series|Valv-Powr, VPVL#Actuator Size|Size 200#Supply Media|Air, Mineral Based Hydraulic Fluid#Bore Diameter|2.95 in#Output Torque|59 ft-lb at 100 psi#Operating Pressure|30 - 116 psi#Operation|Air to


HSH-Flo 2 Way 1/2" 3/4" 1" 1-1/4" 110-230VAC Brass On/Off Auto Return Electrical Position Feedback Motorized Ball Valve (1-1/4 Inch)
By HSH-Flo
In Stock
$78.99

mpn: HSH-Flo, ean: 0738920034095,

4.5 out of 5 stars with 31 reviews
Technical Parameter:◎Model: T32-B2-C;◎Working Voltage: 110-230VAC Both 50Hz and 60Hz;◎Valve Dimension:1-1/4'' NPT Female Thread Connection, 29mm(1.14in) Reduce Bore;◎Wiring Diagram:CR5-02(2 Wires Control, Installed With Position Feedback Wires);◎Valve Body Material: Brass;◎Actuator Material: Engineering Plastics;◎Open/Closed Time: Less Than 5Sec.; ◎Suitable Media: Air, Water, Oil; ◎Power: Max 2 Watts;◎Manual Override: No; ◎Indicator: Yes; ◎Working Current: Max 500Ma When


Wilkins RK1-375V Repair Kits
By Zurn
In Stock
$127.05

mpn: RK1-375V, ean: 0609408022982,

4.7 out of 5 stars with 42 reviews
This is a complete replacement housing for the 1'' Wilkins 375 series double check assemblies. This kit contains the housing body and all internal parts. Genuine Zurn/Wilkins repair parts. No special tools are required for servicing.Complete replacement housing for the 1'' Wilkins 375 series double check assemblies. Contains the housing body and all internal parts. Genuine Zurn/Wilkins repair parts. No special tools are required for servicing.


Everflow Supplies 610T212-NL Lead Free Full Port IPS Threaded Ball Valve, 2-1/2-Inch
By Everflow Supplies
In Stock
$126.32

mpn: 610T212-NL, ean: 0804595995891,

4.7 out of 5 stars with 45 reviews
This is an Everflow Supplies fully approved and lead free full port ball valve, from the premium line, which is constructed from forged brass and has a chrome plated brass ball. In particular, it has 2-1/2 inch female threaded connections for use with ips pipes. In addition, the maximum pressure is 150 psi for saturated Steam and 600 psi for wog, and it is fully approved by csa, UL/fm and upc and Compliant with nsf 61-g. Furthermore, the valve is operated with a chrome plated brass handle with


Apollo 71-500 Series Bronze Ball Valve, Two Piece, Inline, Spring-Close Lever, 3/4" NPT Female
By Apollo Valve
In Stock
$124.78
$97.69
You Save: 22%

mpn: 71-504-01, ean: 0670750679827,

4.7 out of 5 stars with 23 reviews
The Apollo 71-500 series two-piece inline ball valve is made of bronze and has a spring-close lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass and has a stainless steel spring-close handle with a vinyl sleeve for manual on/off control. This valve closes automatically when its spring-close lever is released, ensuring that the valve is only open when an operator is at hand. The


1-1/4" Y-Check Valve Viton Seal
By Georg Fischer
In Stock
$178.99

mpn: 192304034,

4.3 out of 5 stars with 12 reviews
Can be mounted horizontally or vertically, not spring loaded. Max. temp: 140°F. Max. pressure: 150 psi. Clear PVC. Lowest sealing pressure. 1/2'' - 1 1/4'' .29 PSI cracking pressure. 1 1/2'' - 3'' .44 PSI cracking pressure. All parts sold separately. 2- fittings required per valve. Assembly required..


CROSS Manufacturing 143799 SBA Series Cast Iron Double Spool Monoblock Hydraulic Directional Control Valve, 1st Spool 4-Position Float, 2nd Spool 3-Position, Open Centered, 3/4" x 3/4" x 1/2" NPT Female, 2500 psi, Grey
By Cross Manufacturing
In Stock
$339.56
$303.85
You Save: 11%

mpn: 143799, ean: 0015202799164,

4.9 out of 5 stars with 45 reviews
Cross Manufacturing SBA series directional valve is a 3-position, 4-way valve in double spool versions with float. The SBA series features NPTF ports. Fully balanced select-fit honed spools with excellent metering characteristics give maximum load holding capability and long life. 2500 psi operating pressure. 30 GPM flow rate. 3/4-inches NPTF in and out, 1/2-inches NPTF work ports. Adjustable built-in relief set at 2000 psi. Built-in load checks for lifting.Adjustable built-in relief set at


Symmons C-5 Spindle Assembly
By Symmons
In Stock
$85.99
$62.61
You Save: 27%

mpn: C-5, ean: 0671256459357,

4.5 out of 5 stars with 49 reviews
This Symmons is constructed of solid brass and bronze with a stainless steel piston. This product is designed to automatically adjust to balance the hot and cold water pressure. Installing this product is quick and simple.Faucet Spindle Assembly. Brass. 5 Long. 1/2 Diameter at spline. For Symmons Safetymix.


Watts In-Line Double Check Valve Assembly
By Watts
In Stock
$107.00

mpn: 007M3QT-3/4", ean: 0098268922974,

4.4 out of 5 stars with 16 reviews
ASIN: B0044FZ10Q Product Name: Watts In-Line Double Check Valve Assembly Brand Name: Watts Part Number: 007M3QT-3/4'' Manufacturer: Watts Brass & Tubular Number of Items: 1 Category (item-type): industrial-check-valves3/4 '' Double Check valve assembly.


A.O. SMITH 9006101205 Gas Valve White
By A. O. Smith
In Stock
$118.09
$118.04

mpn: Pontiac_Firebird_Large, ean: 0020363154462,

4.2 out of 5 stars with 12 reviews
a.o. smith, state, American water heater ignitor used on model number bth-120/A100, bth-120/A101, bth-150/A100, bth-150/A101, suf/hcg, 60-120, 100-150, 100-199, 100-250, ahcg/hcg-60t120, ahcg/hcg-100t150, AHCG3 130t300, AHCG3 130t400, for bth/suf/hcg, 60-120, 100-150, 100-199, 100-250Igniter, natural and propane gas. High efficiency, for commercial use. For bth/suf/hcg, 60-120, 100-150, 100-199, 100-250.


Maxitrol 210D-1-1/2 1-1/2" Gas Appliance Regulator, Aluminum, 10 psi Inlet Pressure
By MAXITROL
In Stock
$366.99

mpn: 210D-1-1/2,

4.7 out of 5 stars with 37 reviews
Pipe size 1-1/2'', 10 psi Inlet pressure, horizontal upright mounting, Maxtor 210D-1-1/2 1-1/2'' gas appliance regulator, aluminum, 10 psi Inlet pressure. Made in United States. Manufactured by Maxtor company.Pipe size 1-1/2 inch. 10 psi inlet pressure. Horizontal upright mounting.


Dixon APRD250F 2-1/2" NH Adjustable Pressure Restricting Device, 2.5" ID, Cast Brass
By Dixon
In Stock
$251.61
$175.53
You Save: 30%

mpn: APRD250F, ean: 0697464447573,

4.2 out of 5 stars with 44 reviews
2-1/2'' NH ADJUSTABLE PRESSURE RESTRICTING DEVICE - CAST BRASS. Started in 1916, Dixon Valve and Coupling Company has grown to be a world leader in the manufacture and supply of industrial hose fittings and accessories.Adjustable Pressure Restricting Device. Cast Brass Material. 2.5 Inch Size.



Viewing Page 1 of 3

View more products in Hydraulics, Pneumatics & Plumbing.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - massfiscalexposed.org. All Rights Reserved.