Oetiker 15400010 Stainless Steel Hose Clamp with Insert, One Ear, Clamp ID Range 2.5 mm (Closed) - 2.9 mm (Open) (Pack of 150) by Smart Packs by OCSParts at Mass Fiscal Exposed. MPN: 15400010-150. Hurry! Limited time offer. Offer valid only while supplies last. Oetiker 1-Ear Clamps with insert This type of clamp combines the geometry and properties of the 1-Ear Clamp with an insert made of stainless steel.
Product Description & Reviews
Oetiker 1-Ear Clamps with insert This type of clamp combines the geometry and properties of the 1-Ear Clamp with an insert made of stainless steel. These clamps are ideal for demanding applications involving soft or hard rubbers and plastics. The thin-walled insert ring (up to 0.3 mm thick), with an oval protrusion that locates in the ear space, bridges the ear gap and ensures almost uniform compression around the whole circumference of a clamp. Clamp diameter The following applies as a guideline: To determine the correct clamp diameter, push the hose onto the attaching material, (e.g. the nipple), and then measure the outer diameter of the hose. The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. The listed size of the clamp denotes the inner diameter (id) of the clamp. How to Install These clamps can be easily installed using Oetiker Hand Installation Pincers (HIP). The HIP tools have been designed especially for pinching ear clamps quickly and easily. Oetiker HIP Compound Action, Standard Jaw Pincer, Item No. 14100386Oetiker HIP Compound Action Side Jaw Pincer, Item No. 14100387Oetiker HIP Single Action Standard Jaw Pincer, Item No. 14100396How to Remove Ear clamps can be easily removed using Oetiker’s hand clamp cutter (HCC). The HCC tool is designed to safely remove ear clamps. Oetiker Hand Clamp Cutter, Item No. 14100407Please Note: The clamps included in this kit are not designed or intended for use in PEX applications. The sizing references for PEX clamps are not the same as standard Oetiker clamps. Oetiker PEX Clamps should be used for PEX applications.
Features & Highlights
- Compact one-piece clamp: for robust, secure connections, miniature sizes
- Clamp ear: fast and simple assembly, visible deformation provides evidence of proper closure.
- Deburred edges: reduced risk of damage to parts being clamped
- Pre-shaped insert: effective and powerful all-round seal
- Stainless Steel, material no. 1.4307/UNS S30403
Smart Packs by OCSParts
3 x 0.25 x 5 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Smart Packs by OCSParts, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
mpn: RKTR150, ean: 0810256032638,
Irrigation King 63" tripod stand for 1-1/2" rain guns. Inlet/Outlet: 1-1/2" MNPT. Height: 63". material: galvanized steel. Weight: 31 lbs.. Galvanized steel. Stable design. Staked feet to go into ground. ...
By Chugger Pumps
mpn: SSPH-IN, ean: 0852575006334,
CHUGGER PUMP SSPH-IN Replacement Pump Head is made by brewers for home brewers like you. Upgrade your existing March 809 or March 815 heads with this stainless-steel head in less than 5 minutes and stop dealing with leaky stripped-out threads. Replac...
mpn: 24257, ean: 4006274242579,
Step clamp set, pairMakes use of proxxon lathe and micro milling systems even easier by securely clamping small materials. Comes with wooden box for secure storage. ...
2-1/2" NH RL CAP WITH CHAIN, POL & CHROMED BRASS. Started in 1916, Dixon Valve and Coupling Company has grown to be a world leader in the manufacture and supply of industrial hose fittings and accessories.Brass Rocker Lug Cap. Cast Brass Material. 2....